Search results

  1. H

    2/3 drop, does the front axle angle look correct?

    yeah, it was raining all weekend....and the spindles do have what I would say is an excess of surface rust....the OE spindles have zero rust on them after 65k+ miles and these have 2k miles.
  2. H

    2/3 drop, does the front axle angle look correct?

    2/3 drop, does the front axle angle look correct? pic included I have installed the McGaughy 2/3 drop and I thought the axle front angle was supposed to be maintained. From the photo, it shows the axle being at an angle and not horizontal as it was from the factory. 2002 Tahoe LT Autoride...
  3. H

    Hitting bumps causes WOBBLE!!!

    I took the truck to a shop and let them drive it. The tech said what I was experiencing was normal due to the low profile tires....275/45R20....I still dont belive that, but I havent found anything loose or otherwise......gonna look into Max and rigo_jones' suggestions, thanks guys
  4. H

    Pass side higher than driver side

    I just installed the McGaughy's 2/3 drop and the pass side is .5 in higher front and rear than the driver side, any insights? I have the auto ride suspension, should I just drop the auto ride "rod" .5 in lower to make up the difference?
  5. H

    Hitting bumps causes WOBBLE!!!

    I also have this problem along with movement in both my brake and gas pedal. My truck has been lowered using the McGaughy's 2/3 drop and I have 45 series tires...I have also cut the bump stops. Should I be looking at the control arm bushings and ball joints? Newly balanced wheels/tires.....I...
  6. H

    McGaughy 2" Spindle defective??? Photo's attached

    So I pull my McGaughy 2" front spindles out of the box this AM to install them and this is what he ID of the hub area looks like. I need to have a replacement one sent to me right? Anyone else experience something like this?
  7. H

    Installing McGayghys 2/3 lowering kit tips

    Any other tips for removing both the lower and upper ball joints? Im stuck on this step and cannot for the life of me remove either ball joint. Im going to pick up the ball joint tool tomorrow and hopefully that will help.
  8. H

    Post pics of your aftermarket grille's

    Lookin good, guys thanx for posting the pics.
  9. H

    Post pics of your aftermarket grille's

    Nice, out of the two that I have shown, I like the horizontal bars the best. But have been entertaining the idea of getting a new primed, ready to paint, grille. JK thanks for the info on the bumper cover.
  10. H

    Post pics of your aftermarket grille's

    JK, awesome grille....did you paint a chrome grille, buy a primed grille or use a z71 grille? Did the SS bumper cover take a lot of modification to work? What are you using for the actual bumper beneath the cover/fascia?
  11. H

    Post pics of your aftermarket grille's

    I would like to see some of the after market options people have gone with. Please also include where you bought it from. Im currently looking at these two: "" "" Any insight on either one of these?
  12. H

    is this a problem free/recommended 2/3 drop kit

    Is there a kit to disable the Autoride?
  13. H

    is this a problem free/recommended 2/3 drop kit

    The kit contains Belltech 2" drop spindles for front, 3" H&R springs for rear along with the shocks This is for sale and I new to the tahoe and have heard people complain about shock length, type and mounting locations that provide a bouncy ride when lowered. Im trying to avoid that and...
  14. H

    front bumper differences 02-06

    with only the air dam being added at 04?
  15. H

    front bumper differences 02-06

    I was wondering what the differences between 02-06 the front bumpers were. Thanks Justin
  16. H

    CD Changer

    Can the factory cd changer hook up to any aftermarket HU?
  17. H

    02 Escalade HU and CD Changer Fit 02 Tahoe

    Subject line says it all. Are the hookups the same on the back of the unit?

Forum statistics

Threads
132,245
Posts
1,864,671
Members
96,794
Latest member
Pippyochi

Latest posts

Top