Search results

  1. mharders

    Escalade Vs Denali Vs Tahoe Cluster

    Trans temp will work as stated above☝ Sent from my SAMSUNG-SM-N900A using Tapatalk
  2. mharders

    Playing with Plasti-dip

    You should do the whole wheel or nothing. Looks like it's missing. Try in on your grille and badges. Sent from my SAMSUNG-SM-N900A using Tapatalk
  3. mharders

    Running board LEDs

    Definitely should clean that wiring up. You could drill a small hole in the bottom of the door and use the factory wire loom or at least under the door seals. Lights look good on. I want to do this in white as well @XL04 most strips use 3M adhesive backing. Sent from my SAMSUNG-SM-N900A using...
  4. mharders

    headlight swap

    Denali lights are a straight swap with the Yukon and vise versa. No need to change anything else. Also Denali lights are super easy to do a retro fit into. Just did mine last month and took about an hour at most. Sent from my SAMSUNG-SM-N900A using Tapatalk
  5. mharders

    First EVER 25% OFF SALE On ALL R1Concepts Performance Brake Parts!

    Pmed Sent from my SAMSUNG-SM-N900A using Tapatalk
  6. mharders

    Question about Plastidip

    Go on you tube there are tons of how to videos. But, what you want to do is spray a light first coat (50% coverage) then apply 4-5 heavy coats. Let it fully dry between coats , about 15 min or so. If you want it to be removable, I wouldn't use any automotive clear coat or the like. It will make...
  7. mharders

    Wheels

    I think the 375s with esky handles and rack would look sick against that blue. Or color matched handles with the Texas wheels... Either way you can't really go wrong tho!
  8. mharders

    Not a SUV, but a GM..99 RCSB build

    Damn just read this whole thread, awesome build! Looks like you know what you're doing. I bet that thing will be a beast to drive after you get everything tuned in! Again, great work! Sent from my SAMSUNG-SM-N900A using Tapatalk
  9. mharders

    Night shot.

    This^^^ I ran PnP hid kit in the factory projectors for years. I thought they looked/worked great up until I did my retro a couple weeks ago. What a difference it made, Worth every penny! Wish I would of done it along time ago. Hid in OEM projectors will work but, the light output is minimal...
  10. mharders

    plasti dip lifespan?

    Do you have the factory flares? What do you drive? There should be enough gap between them and the body for you to peel it without issue. If your worried about it grab a can from home depot and test a small section Sent from my SAMSUNG-SM-N900A using Tapatalk
  11. mharders

    plasti dip lifespan?

    Yea just make sure you buy the heavy duty 3M tape and make sure it's the thin style. Why are you removing the flares? You shouldn't have to remove your flares unless you want to keep them oem color even then you could just peel them after the fact Sent from my SAMSUNG-SM-N900A using Tapatalk
  12. mharders

    plasti dip lifespan?

    Yea I can see 5 gallons would work. You'll probably get full Coverage on the 3rd gallon if your doing matte black. 4th and 5th gal will just add thickness so it's easy to peel down the road. Like I said going from black to white suck lol! Make sure to tape your Window sills really good, that's...
  13. mharders

    plasti dip lifespan?

    Make sure you buy enough dip. I used 6 gallons when I dipped my truck from black to white and I didn't do the roof. With that said, white doesn't cover as well as other colors, so it might be a little less depending on what color you're going with. I'll be dipping mine again in the next couple...
  14. mharders

    What did you do to your NBS GMT800 Tahoe/Yukon Today?

    Ok I'll give that a shot, thanks! There doesn't seem to be any other way to 'twist' or adjust it other than that cause of the way the bracket is made. Does the cutoff shield bend pretty easily? Sent from my SAMSUNG-SM-N900A using Tapatalk
  15. mharders

    What did you do to your NBS GMT800 Tahoe/Yukon Today?

    Thanks J! Well I think I need to tweak the driver side a bit, it kind of slopes down compared to other pics I see. I'm not too familiar with HID projectors since this is my first set. How do you think the cut off looks? I just adjusted them so they are level with each other. I need to lower them...
  16. mharders

    What did you do to your NBS GMT800 Tahoe/Yukon Today?

    Installed my HID retro last night, still need to figure out how to adjust them. Swapped out my black painted housing headlights for stock ones with the retrofit and swapped smoked turn signals for clear ones[emoji41] 25 ft away 50ft away Sent from my SAMSUNG-SM-N900A using Tapatalk
  17. mharders

    ** WTT: Belltech 2-4 Drop Kit W/Extras**

    Pmd Sent from my SAMSUNG-SM-N900A using Tapatalk
  18. mharders

    2006 Yukon Denali radio help

    Here is a write up on how to install a 3.5mm jack into the stock radio. http://www.tahoeyukonforum.com/forum/showthread.php?t=39277 Or http://www.tahoeyukonforum.com/forum/showthread.php?t=42372 Then you should just be able to hook up a compatible bluetooth to your factory stereo Sent from...
  19. mharders

    Esky cluster from junkyard

    That's a pretty reasonable price. I picked mine up from a member here for $150 Sent from my SAMSUNG-SM-N900A using Tapatalk
  20. mharders

    Picked up a new to me 04 Denali

    Here's a pic when I dipped my whole truck white Sent from my SAMSUNG-SM-N900A using Tapatalk
  21. mharders

    Esky roof rack

    Pmd Sent from my SAMSUNG-SM-N900A using Tapatalk
  22. mharders

    NEED 02 ESCKY FRONT GRILL + fog lights

    There are a few by me but I'm on the other side of the country lol. Anyways here ya go.. http://seattle.craigslist.org/est/pts/4401577621.html http://seattle.craigslist.org/tac/pts/4377754748.html http://seattle.craigslist.org/sno/pts/4394128191.html...
  23. mharders

    What did you do to your NBS GMT800 Tahoe/Yukon Today?

    Clean burb^ I like it!
  24. mharders

    Upgrade time...

    Looks nice congrats! Should of swapped the roof rack off of the old on to the new and sold those esky appliques for a little extra mod $$
  25. mharders

    New to the Forum.

    Welcome! There's a wealth of knowledge over here for our platforms, you've came to the right place lol. Let's see some pics of your hoe!

Forum statistics

Threads
132,254
Posts
1,864,807
Members
96,806
Latest member
662longsleeve

Latest posts

Top