Search results

  1. Shackman7878

    Removing SSV Center Console/Wiring

    If you have a Volt meter or DVOM or test light I would check what wires are live and what are dead. I would follow each wire to the dash if you cant trace it anymore I would cut it and cap the end (Closed End Crimp Caps). I had to pull most of my interior to trace all the wires - Radio, ac...
  2. Shackman7878

    2009 Yukon 2500 LY6 Dropped Valve seat

    Also did the trunnion upgrade kit, One had square and powder bearings, and 2 fell out with little to no pressure. Used my 1950 Arbor press.
  3. Shackman7878

    2009 Yukon 2500 LY6 Dropped Valve seat

    Truck is up and running.
  4. Shackman7878

    2009 Yukon 2500 LY6 Dropped Valve seat

    Installed the lifters and guides, head gaskets and heads bolts are snugged down for now. Weather allows will do the cylinder head torque sequence tomorrow.
  5. Shackman7878

    How the heck to keep my tag lights in?

    Might have to Mod the stock set up drill it out and add your own Led set up. I would check Boat catalog for lighting. Lights I found on Ebay (For ideas have not bought them) You can cut the wires and make your own connector. https://www.ebay.com/itm/294856266611...
  6. Shackman7878

    2009 Yukon 2500 LY6 Dropped Valve seat

    Right now After this project I would break even If I sell the yukon now. Maybe a option for the tahoe but would love to drop a L94 in it.
  7. Shackman7878

    2009 Yukon 2500 LY6 Dropped Valve seat

    Casting was 823
  8. Shackman7878

    2009 Yukon 2500 LY6 Dropped Valve seat

    Added more photos.
  9. Shackman7878

    2009 Yukon 2500 LY6 Dropped Valve seat

    2009 Yukon XL 2500 186k miles Ex fire chief command vehicle Was getting a Misfire code cylinder 8, and rich code bank 2. Put a new Spark plug and Ac Delco Injector Cylinder 8 and swapped the Lead and coil to different cylinders cleared the codes and drove it 50 miles then the code came back but...
  10. Shackman7878

    Theftlock on 2011 Yukon Denali with DVD/Nav/Bose?

    I know there is a couple company's that do reprogramming there is a couple but this one come highly recommended. Make sure to note on Ebay ad Item is in working condition but May need to be programed by a 3rd party to work in your Car/Suv. Another thing is to email the buyer before shipping...
  11. Shackman7878

    2014 PPV Front Seat Replacement

    Craiglist, offerup, Facebook market place, look for anyone doing a part out. If you would see if you can test them out if not inspect for bent or broken parts under the seat. Car-part.com is my go to most of the time if you cant find seats search for a Hood, Door, and etc some places don't...
  12. Shackman7878

    2014 PPV Front Seat Replacement

    there is that I know of 3 styles of connectors Locking style like the tan seat that one has all the options usually known and 6/8 way adjustable, One marked driver side is your usual PPV/SSV seat connector seat only goes forward and back up and down photo below. Have issues finding the 3rd style...
  13. Shackman7878

    2014 PPV Front Seat Replacement

    If it has a seat airbag make sure the connectors are the same ran into this issue Square plug and Round plug. Learned the Hard way there was 2 types it is a easy swap if you cant get the correct one.
  14. Shackman7878

    2011 tahoe ppv

    If you check your glove box there should be RPO codes on my 13 SSV it was YE9 - LS TRIM The RPO codes tell you everything about your Tahoe.
  15. Shackman7878

    2010 tahoe ppv fuel pump relay location - SOLVED

    Found this post https://www.tahoeyukonforum.com/threads/trouble-finding-fuel-pump-relay-fuse.117606/
  16. Shackman7878

    07 SSV Tahoe rear hatch glass opener?

    I did not know there was 2 styles one with and without. https://www.ebay.com/itm/124517844630
  17. Shackman7878

    I need someone more adept with electronics for a Tahoe PPV

    Added a parts diagram, if I remember right 1 goes to alternator 1 goes to fuse block 1 goes to the dash.
  18. Shackman7878

    07 SSV Tahoe rear hatch glass opener?

    I did not know it was there until I bought a new replacement trim with a camera had to drill the hole for it and rewire the harness.
  19. Shackman7878

    Anyone program a new mirror

    Need more details on what you need programed Power folding, turn signals, and etc. Here is my post on adding power folding mirrors https://www.tahoeyukonforum.com/threads/adding-power-folding-mirrors.123610/#post-1634483
  20. Shackman7878

    Drivers front door doesn’t always unlock

    I had the same issue turned out to be the lock door trim was catching on the inside you can pop it off and see if that fixes your issue.
  21. Shackman7878

    Anyone replaced the factory Bose sub in its plastic box with aftermarket sub and or used an aftermarket amp with the Bose sub?

    I bought a custom fit box from a guy on eBay, it is a tight fit I also had to cut a piece of plastic for the box to fit. But you will need to run a different amp plus wiring, subwoofer, If you do not want to install a aftermarket head unit you can use a RCA Converter. 8 inch box...
  22. Shackman7878

    2008 Yukon denali back up camera issues

    Where I went to, To buy backup camera for my Tahoe and Yukon. https://www.ebay.com/sch/m.html?_ssn=jj_originalequipment&_osacat=0&_armrs=1&_odkw=&_from=R40&_trksid=m570.l1313&_nkw=camera&_sacat=0
  23. Shackman7878

    Tow Mirrors That Don't Shake.

    I put these on my Yukon and they do not shake https://www.amazon.com/gp/product/B091CD727M/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
  24. Shackman7878

    Remote Start 2013 PPV

    Read my Post on this subject Adding Factory remote start https://www.tahoeyukonforum.com/threads/remote-start-ideas.125290/page-2#post-1559440 Adding Dic switch to check remote start is turned off. https://www.tahoeyukonforum.com/threads/remote-start-ideas.125290/page-3#post-1559442
  25. Shackman7878

    Aftermarket wheel hub bore too big for spare tire holder

    Used rivets do not have a welder at this time. Black is the claw. Red is plate cut slightly smaller than the claw thread it one side then the other, Gray is the squares I cut and riveted on each side behind the edges of the claw and give it some strength. You will need to measure the hub...

Forum statistics

Threads
132,301
Posts
1,865,657
Members
96,888
Latest member
madmoney

Latest posts

Top