Search results

  1. A

    E-Fan Wire, Solder or Connectors?

    Don't take this personal, but your soldering needs some help. I wouldn't leave it like that. You can't get a shrink tube over it, and that looks horrible. It looks like you tried the, "spread the strands, and intermingle" method. I would heat that back up and separate it and try again...
  2. A

    Need your break-in skills 2003 Chevy 4x4 Sierra.

    I've seen this method being used on quite a few different vehicles. If it does, it just costs about 10 feet of duct tape.
  3. A

    speaker question.

    Good luck with that. Nav is what turns a name brand head unit from $150 to close to $1k. You can hunt for deals on ebay, you might get lucky. The only place you are going to find that for $400 is amazon and alibaba, and those head units are junk all around. All the other specs are trash...
  4. A

    Need your break-in skills 2003 Chevy 4x4 Sierra.

    I saw this the other day, and remembered this thread. No clue if it will work, or if having a charged battery would help.
  5. A

    Need your break-in skills 2003 Chevy 4x4 Sierra.

    You could dremel cut a notch in the end of the four seat bolts. Then use a screwdriver to unscrew all four seat bolts from under the cab. Now go and take the bed off. With the bed off you have access to the cab through the vents in the back. Take the vent off, and push the seat forward...
  6. A

    Need your break-in skills 2003 Chevy 4x4 Sierra.

    If you could charge by the trailer harness, couldn't you do the same thing by disconnecting the two cables off the starter? If you do that, you just need a coat hanger to hit the unlock button. I don't like writing stuff like this, so if a mod has a reason to delete it, please do. If it...
  7. A

    Heated wheel on 2004 Tahoe

    I wanted to find upgrade options with an airbag for my 02. Here is as far as I got. So they changed the steering shaft from 02 to 03. The splined shaft on the 03-07 is the same as the NNBS, and even the K2XX. (03-07 NBS shaft, and K2xx wheel). The shaft is keyed and the steering wheel...
  8. A

    Axxess ASWC-1 programming.

    Did you program it? I want to say #3. It's not just plug and play.
  9. A

    Rear most power outlet not working

    Here is something I found on my 02 pickup. I think it's different for 99-02 to 03-07. For the 99-02 pickups, we have 3 cigarette lighters below the dash. One of them is on the 15a cigar fuse. The other two are on the 20a Aux PWR fuse. I pulled mine off before I could test which one was...
  10. A

    speaker question.

    So I think I'm about to give you some bad news here: Those speakers are 2.5ohm impedance on the 60csx components, & 2.7 ohm impedance on the rear 62ix. I know on some of the SUVs, the door components are wired in series. With the bose setup, they are an odd ohm, and that's what I think these...
  11. A

    2004 tahoe whining not serpentine belt tensioner or idler pulley

    I see you just replaced your alternator. The factory 105 amp alt uses a small case alt. Anything 130+ amp including aftermarket uses a large case alt. The pulley is in a different place and requires a belt that is 3/4" longer. You can install the old/smaller belt on it, but it has a lot...
  12. A

    2002 Tahoe LT 2wd

    Not sure if you bought em yet, but I would recommend instead going to a 265/70/17. You can find take offs for cheaper than new tires, (really tight window right now for ya) The size is very common, and also does just what the 75 sidewall does for size. The biggest reason is because with 17s...
  13. A

    Powerstop K6560-36 vs Detroit Axle Drilled/Slotted Brake Kits

    You don't have many posts, so just making sure; Have you already upgraded the calipers to the NNBS? Those pads won't work in 2004 calipers. (The 2005-2007 NBS have the same size rotors, but different style pads and calipers than the NNBS (/K2XX) caliper upgrade. I'm always the buzzkill on...
  14. A

    New Mechman 250 Alternator Question

    If you're upgrading to a mechman 250 because you are going to have a larger draw, (from probably a stereo), then cool, but you only have a few posts, and it's common for people to be concerned about the dropping voltage. 05+ the alternator's voltage is no longer internally regulated, and...
  15. A

    Interesting Discovery Under Hood Fuse Box...

    I would pull up the fuse block itself (the entire thing). Four bolts on the corner bracket for an 05. On the fuse panel, there are just two notches that you need to pull the base out for on the out-side. Then a couple tabs to pull out engine side. You don't need to disconnect wiring, and...
  16. A

    Cold air filter on a 2003?? debating putting a K&JN colod air filter on our Tahoe, it's running strong at 255k miles

    Save your money. They work on other vehicles, not an NBS. K&N are also the worst air filter you can get for your engine. They filter the least amount of particulates compared to every other filter out there. P.S. For your next thread, don't buy a throttle body spacer.
  17. A

    GMT800 vs GMT900. Which to buy?

    The GMT900 has more power for the same size engine, better mpg, and an optional 6.2. Better transmission option with the 6l80. Looks better. Nicer interior. The cons are they tried goofy shit in the engine bay to increase MPG. On paper DOD, AFM, and VVT are great, but they make other things...
  18. A

    Mod planning

    I didn't say anything about LS1. Still not sure what you're referring to. Yeah manifold. The TBSS intake is not the best, (which is a semi-relative answer). It's the best, factory intake, for low end. Yeah tuning. Aftermarket computers are an option. Some are ridiculously outrageous...
  19. A

    Mod planning

    I really don't want to get into stupid arguments like this. You didn't need to fix anything. A stock 5.3 isn't revving high enough to drop off because of the stock cam. and since you're basing this off of the video you posted, shorties on a stock engine picked up 4hp and 6lb ft, and illegal...
  20. A

    2002 LT front seat replacements

    NNBS seats bolt right in, but you're going to need to figure out the electronics. Here is the DIY I made. https://www.performancetrucks.net/forums/gmt-800-older-gm-general-discussion-130/seats-99-02-fronts-fix-clean-558486/ Not sure if your covers are bad. I can tell you right now, the...
  21. A

    Mod planning

    First, don't bother with a CAI. It's a waste of money. While saying that, so do TB spacers. It's really going to depend on your budget and goals. Tuning needs to be a part of whatever you do: ~$500 to do it yourself, ~$500 to have someone do it for you once, ~+$1K to get something that...
  22. A

    AC belt size or part number?

    Just so it's clear, there are two sizes of belts and alternators. There is a small and large case alternator. The small case is a 105 amp alt. The 130/145/160 amp alt is the large case. (I also have a mechman 240 alt and it is the large case, as are just about every aftermarket alt...
  23. A

    NBS Mtx thunderform enclosure

    Looks like it sold pretty quick. It was only up for about a day and a half, and just over a day after I posted it. Not sure if someone on here got it, but this is probably the most rare tahoe/yukon specific, NBS item I can think of.
  24. A

    NBS Mtx thunderform enclosure

    Some of you should know what this is. MTX's loaded powered enclosure, (plug in RCAs, set the gain to your head unit, add a power wire, and have bass). Not big and thumpy, but hidden, and easy for sound quality. I've had this search saved for probably 5 years, and this is the first one I have...
  25. A

    Where to buy crimps for big three upgrade?

    Do not splice your two grounds together. Run two separate cables. One from batt - to chassis, and the other from batt - to engine block, (alternator mounting bolt). Do not splice to the starter or relay junction box. Your alternator goes to batt +. (that's the big 3). The terminals are...

Forum statistics

Threads
132,306
Posts
1,865,706
Members
96,895
Latest member
EGDinSD

Latest posts

Top