Search results

  1. 87carl

    Evap diagrams

    Does anyone have any links to diagrams showing how all the pieces of the evap system connect together? I've tried searching but haven't had any luck. Especially looking for any hoses that connect to the fuel tank. And if anyone can get hose size or connection type that would help also. My burb...
  2. 87carl

    Fuel tank in place where the spare tire is located.

    Eliminating original tank
  3. 87carl

    Fuel tank in place where the spare tire is located.

    So According to these measurements we can have a tank is that 30 length x36 width and a little over ten inches tall 29.75 width x 33.5 length x 13.13 in. Is the dimensions of a 98-99 42 gallon tank so that sounds like it will be tight but should fit if turned 90 degrees which would mean building...
  4. 87carl

    Fuel tank in place where the spare tire is located.

    I know this is an old thread but instead of making a new thread on this topic I figured bring this one back from the dead. I have been wanting to do this since the day I bought my burb. Has anyone done this yet? I was thinking of getting a 42 gallon tank and the rear crossmembers that the tank...
  5. 87carl

    Light bar inside behind windshield

    I'm hoping the shroud will act as a cut off and I can get it adjusted just past the hood
  6. 87carl

    Check out this mevotech control arm problem

    I don't think snufflucks is but I am
  7. 87carl

    Light bar inside behind windshield

    I was thinking about the police lights when I was planning how to do mine. Alot of time they hang off the visor mounts that's where I got that idea and normally they don't shield them much. I don't think glare will be to bad from what pictures I have found of people who mounted the light inside...
  8. 87carl

    Check out this mevotech control arm problem

    Nothing wrong with gm parts. But comparing my stock gm arms to the mevotech ones there is a definite difference in joint size and the upper control arms one side is alot thicker than stock. I am lifting mine at same time as replacing everything and I plan to abuse it on trails and through...
  9. 87carl

    Check out this mevotech control arm problem

    I just got mevotech upper and lower control arms and outer tie rods from rock Auto but I got there tough terrain extreme ones with larger ball joints and I think thicker casting. Mine all look and fit good and my ball joints are fully seated lifespan of the parts idk yet haven't driven on them...
  10. 87carl

    Light bar inside behind windshield

    The bar in the hd bumper looks good I've seen those if I ever swap an hd front clip on I would do that but not with it on the ground. And was planning on doing windshield by using a transfer scribe and do the cardboard template in 3 or 4 sections that will get taped together before being...
  11. 87carl

    Light bar inside behind windshield

    Trail lightning mostly. And I figured a seal similar to car trunk seals would work against the glass and foam tape on the back should seal off glare decently enough hopefully. And yea a little bit of work but it's a pretty basic fab project hard part will be scribing and matching curve of the...
  12. 87carl

    Lower dash switch options

    Does anyone have a pin out or wiring diagram for these switches
  13. 87carl

    Light bar inside behind windshield

    Idk if this is right section to post this but is in the burbs interior. Has anyone seen it done on a nnbs truck burb or hoe? There's a youtube video of a newer chevy truck done that way and there's kits for jeeps to do it. I like the idea of it being inside because can't be stolen as easily,no...
  14. 87carl

    Rc silverado front lift and skyjacker rear lift coils

    I must have misread your first comment. And I didn't feel any binding when I did that
  15. 87carl

    Rc silverado front lift and skyjacker rear lift coils

    Are you saying I want it to bind? And everything is brand new it shouldn't have any premature wear. And it's at almost full droop even with it on its own weight. It only went down a couple inches when I let jack down. My wife asked why I stopped letting it down I pulled the jack out and she was...
  16. 87carl

    Rc silverado front lift and skyjacker rear lift coils

    So far the only thing that bugs me is the cv angles but hopefully that will straighten out some when suspension settles
  17. 87carl

    Rc silverado front lift and skyjacker rear lift coils

    Passenger side front is done other than bleeding brakes and hooking up the sway bar. It will settle some when we start to drive but currently is sitting 4 inches higher than it used to in the rear and 6.5 inches higher in the front. Way more than it should be with a 3.5 lift in front and 2.5 in...
  18. 87carl

    Rc silverado front lift and skyjacker rear lift coils

    With brake hose bracket upside down abs wire can't clip to it without hitting the bolt and frame so drilled 2 holes in upper control arm mount to clip abs wire. note how close bracket is to the alignment cams but they do clear and have full range of motion
  19. 87carl

    Rc silverado front lift and skyjacker rear lift coils

    Updated title seems I'm covering more than just rear coils on here. I can't wait to get it done. doing it with mostly hand tools in a driveway takes forever I should have done it in my friends shop on the lift. And if I just followed lift instructions and didn't do all the extra welding it...
  20. 87carl

    Rc silverado front lift and skyjacker rear lift coils

  21. 87carl

    Rc silverado front lift and skyjacker rear lift coils

    Last 2 nights have been long late nights so haven't had chance to update this first night I reinforced the rearward passenger side upper control arm mount and flipped brake line bracket upside down and installed the upper control arm, strut, calliper and brake hose. Last night cut the...
  22. 87carl

    Extended rear brake hoses and rear sway bar end links

    Do you have a link to the hellwig links I haven't been able to find them. I was thinking these one's they're 12.25 inch long which is almost perfect length they are for a jeep tho so not 100 percent sure they will fit? https://teraflex.com/shop_items/jk-3-4-lift-rear-sway-bar-link-kit-12-1-4-pair
  23. 87carl

    Extended rear brake hoses and rear sway bar end links

    Anyone have any links to extended rear brake hoses the only ones I have found are from crown performance and they are almost exactly 200 bucks after tax and shipping. Might say screw it and order them if I can't find any others. Rear sway links I can't find much of anything for them. I have 2.5...
  24. 87carl

    Adjustable rear control arms.

    Ok will just have to make sure to mention it to the alignment shop so they know to check it.
  25. 87carl

    Adjustable rear control arms.

    Thinking about ordering the spohn adjustable control arms and panhard bar for my suburban. Pan hard seems easy to adjust just get axle center side to side. But I have no clue how to set up the control arms properly. Can anyone tell me or point me to a detailed write up on how to adjust them...

Forum statistics

Threads
132,311
Posts
1,865,747
Members
96,902
Latest member
ToddYYC

Latest posts

Top