Search results

  1. clandr1

    What did you do to your NBS GMT800 Tahoe/Yukon Today?

    This is incredible work - great job!
  2. clandr1

    What did you do to your NBS GMT800 Tahoe/Yukon Today?

    I think the most obvious answer is your booster is bad, but check for leaks around your entire system - could be losing pressure somewhere at a caliper, a line connection, etc.
  3. clandr1

    What did you do to your NBS GMT800 Tahoe/Yukon Today?

    Good thought, and definitely a possibility. With the key off, have you checked for continuity across the solenoid (when it should be open)? If there is continuity, there is your culprit.
  4. clandr1

    What did you do to your NBS GMT800 Tahoe/Yukon Today?

    I think it's potentially a bad battery. If it drops below 12.6v once given a chance to rest overnight, I believe it needs to be replaced.
  5. clandr1

    Adjustable pedals stopped working

    I cut out a section of my weathertech mats so the gas pedal arm would go all the way to the carpet.
  6. clandr1

    Sunroof track arms have snapped - any experience with a fix?

    Sorry to hear that. I was hoping you’d find a solution! I installed a wind deflector in April 2022 after giving up on fixing the factory wind deflector. It’s worked well and I’m sure you’ll be happy with it long term. Auto Ventshade AVS 78061...
  7. clandr1

    What did you do to your NBS GMT800 Tahoe/Yukon Today?

    Drove to Gatlinburg, TN last Sunday and came back yesterday. About 1,800 miles round trip and not one single problem. I rolled over 272,000 just before I got home last night.
  8. clandr1

    What did you do to your NBS GMT800 Tahoe/Yukon Today?

    On 7/5 I took my truck in for an alignment. This past weekend I noticed it was still pulling to the right, so I made an appointment to take it back today. After an hour, they said the pitman arm, idler arm, and tie rods (inner and outer) all needed to be replaced to the tune of $1,400 for...
  9. clandr1

    What did you do to your NBS GMT800 Tahoe/Yukon Today?

    You’ll have to get the stuck CD out first :D
  10. clandr1

    What did you do to your NBS GMT800 Tahoe/Yukon Today?

    Today I did something that is out of character for me - I let a shop touch my truck. I bought a Sony XAV-AX1000 and Best Buy offered free installation. So, today when I arrived for my appointment, I tried to (as nicely as I could) convey how long I've owned this truck, and how much I love it...
  11. clandr1

    What did you do to your NBS GMT800 Tahoe/Yukon Today?

    I wish I could say, but the only thing I’ve done suspension wise was eliminate the rear Nivomat shocks when they started leaking, and swapped to normal non nivomat springs and bilsteins in the rear. That was around 2017. I didn’t notice any bounce in the truck, either before or after.
  12. clandr1

    What did you do to your NBS GMT800 Tahoe/Yukon Today?

    Hand washed it today and filled up with E85.
  13. clandr1

    What did you do to your NBS GMT800 Tahoe/Yukon Today?

    Did you try fitting it in your Denali with the cutouts facing towards the front of the truck? It is offset a bit to one side (I received mine today).
  14. clandr1

    What did you do to your NBS GMT800 Tahoe/Yukon Today?

    Is the standard or the large the way to go? I usually have a 30 oz tumbler, not looking for something too big, but also don't want to get one that's too small.
  15. clandr1

    What did you do to your NBS GMT800 Tahoe/Yukon Today?

    My original rear lock actuator worked for over 16 years before it failed. I replaced with another OEM actuator that failed after about one year. The third unit which is also OEM has been used for about two years now without any issues. I would recommend replacing your lock actuator with a...
  16. clandr1

    What did you do to your NBS GMT800 Tahoe/Yukon Today?

    Gave it a hand wash today, hoping I can dodge the slight chance of rain on Monday. Also, pics of the new weathertech floor mats.
  17. clandr1

    What did you do to your NBS GMT800 Tahoe/Yukon Today?

    I received the floor mats today. The second row mat was folded in half for transport, so I left it out in the sun for a few hours to warm up and help it relax into position. I installed them this evening and initial impressions are positive. I just wish they offered an option with coverage...
  18. clandr1

    What did you do to your NBS GMT800 Tahoe/Yukon Today?

    Thank you all for the feedback on floor mats/liners. I ordered a set of 1st and 2nd row Weathertech "custom fit" floorliners and will report back on my thoughts when I install them. In other news, I was unloading my car today and finally figured out (after 19 years of ownership) that with an...
  19. clandr1

    What did you do to your NBS GMT800 Tahoe/Yukon Today?

    I washed my floor mats today and I’m very close to buying some Weathertech floor mats. Anyone have any feedback on them before I spend close to $250?
  20. clandr1

    What did you do to your NBS GMT800 Tahoe/Yukon Today?

    Mine hasn't thrown any codes unfortunately.
  21. clandr1

    What did you do to your NBS GMT800 Tahoe/Yukon Today?

    I have what I think might be a similar condition. When I come to a stop sign and then immediately give it gas, it's like the trans takes a second to catch up to the RPM's on the truck. Otherwise it drives just fine. I'm wondering if my downshift solenoid needs to be replaced, so something you...
  22. clandr1

    What did you do to your NBS GMT800 Tahoe/Yukon Today?

    Did that myself in October 2022. The nuts under the dash are extremely tedious to remove and install.
  23. clandr1

    What did you do to your NBS GMT800 Tahoe/Yukon Today?

    Where did you find replacements?
  24. clandr1

    What did you do to your NBS GMT800 Tahoe/Yukon Today?

    Thank you for the compliment, and more photos are my pleasure :) It was built in Arlington, Texas, I bought it in Grapevine, Texas brand new, and I've lived in the DFW area ever since. So, no exposure to road salt, etc. except for a handful of times when the DFW area received snow/ice that was...
  25. clandr1

    What did you do to your NBS GMT800 Tahoe/Yukon Today?

    Hand washed it today

Forum statistics

Threads
132,311
Posts
1,865,742
Members
96,899
Latest member
mohd33303

Latest posts

Top