Search results

  1. STORMIN08

    Spark plug wire & spark plugs

    i would recommend purchasing the correct crimp pliers for those...i have made many of sets, the pliers make it much nicer to do. i just have the summit brand and they do great.
  2. STORMIN08

    What did you do to your 2015-2020 K2XX Tahoe/Yukon Today?

    i like, 2 other items though... 1. what was the need or desire for the aftermarket over flow ?? 2. i highly recommend covering your terminals on the battery top, that bus bar is fused and actually very delicate, we have them fail on our work rigs daily
  3. STORMIN08

    What did you do to your 2015-2020 K2XX Tahoe/Yukon Today?

    where are your finished pics, i always contemplated adding a logo or script to mine after i painted them. looked for an fuel rail cover also as the intake cover required the entire intake to be removed to get it out.
  4. STORMIN08

    Rear Shocks Question

    a note of caution, using the 1500 TRUCK line of shocks...valving could be a factor in ride quality...weight spring rate, suspension design, all come into play as far as valving goes.
  5. STORMIN08

    Cowel hood or side panel air scoop?

    the GS is my fav...i was rollin my 1994 senior year of HS in a 60K original mile skylark (350 2 brl), Bamboo Cream w/Brown top and interior
  6. STORMIN08

    Cowel hood or side panel air scoop?

    i have commented elsewhere about this also, it could have slightly higher air temps at idle, but at speed...i doubt it. this area is far beside and more forward of the radiator. i could see if it was an open element on a carb application, yes it would heat soak very easily. but even at that...
  7. STORMIN08

    Cut/polish - new to me Tahoe

    the one big key note to remember...work the area that you choose...BUT COUNT THE NUMBER OF PASSES IN EACH DIRECTION. once you have the desired look, your time will be saved by following your counted steps. if you start over on every area, you will take days to complete. but once you learn the...
  8. STORMIN08

    What did you do to your 2015-2020 K2XX Tahoe/Yukon Today?

    all you r missing is a rear 1" drop coil.
  9. STORMIN08

    Rear suspension clunk noise after lowering

    I recently had a very similar situation on my lifted 17...during inspection i removed the track bar ( lateral link behind diff), the ends were JUNK at 78K, BOUGHT NEW from dealer and all was fine for a few trips, then it started again. finally chased the noise down to bad endlinks on rear sway...
  10. STORMIN08

    17 Yukon 4” ReadyLIFT SST Lift

    depending in design, i tend to drill several holes in mine to soften them up. also do this when lowering to keep the cush, but not to remove entirely
  11. STORMIN08

    2017 Tahoe/Minor scratches ..

    Dr. color chip isnt bad, but more noticeable that a scuff and polish
  12. STORMIN08

    2017 Tahoe/Minor scratches ..

    depending on your skill level, i usually find automotive paint to match...clean and fill the chip, then lightly wetsand with 2500-3000 and polish back out. most chip repairs looks worse because the new paint sits on top of the old clear, that portion needs to be removed leaving the paint only...
  13. STORMIN08

    BDS Suspension UCA Kit (#121152) - NEW product? - Has anyone tried these yet?

    there are differences in each model year prior to XX year, i do not recall the specifics, but i do know the material type of your stock arms matters due to the ball joint used. gm did switch to a single ball joint size for all arms, but i do not recall which year that stated
  14. STORMIN08

    2017 Tahoe/Transs fluid

    could be a vent tube pushing extra fluid
  15. STORMIN08

    BDS Suspension UCA Kit (#121152) - NEW product? - Has anyone tried these yet?

    dry joint maybe stiff depending on type, and with no grease...probably wont be smooth i have had seeral in years past like this, installed...greased and ran with no issues. all depends on how you feel
  16. STORMIN08

    Anyone running ReadyLift 3” lift with 18” wheels?

    agreed, it could be done with a spacer...just dont care for info being projected that someone may misinterpret...a factory BS wheel and XX" lift may not work. most think fender clearance until they install and have other issue. always best to full cycle suspension and turn wheels fully while...
  17. STORMIN08

    37” BFG K02 install with 4” SST Lift

    sadly, they do not...very similar to the earlier years where gmc had black pillars above the tailights and chevy was body color.
  18. STORMIN08

    Anyone running ReadyLift 3” lift with 18” wheels?

    you may want to reconsider this comment, the increased angle of the upper arm could casuses issues witht eh barrel of the wheel contacting the arm at full lock...generally the front leg of the upper arm. on my 17, with 2.5" the wheel barrel is very close, depending on your backspacing, the...
  19. STORMIN08

    37” BFG K02 install with 4” SST Lift

    that looks great ! personally, i always notice and love how the yukon rear bumper lower valance carries the trim look...even on black.
  20. STORMIN08

    My 2019 GMC Yukon Graphite Edition Performance Package

    once you have them, you do... to the OP...great looking ride !
  21. STORMIN08

    Parking sensors are not great

    you may have a bad sensor...i have no issues with this at all. is it giving the flashing red dash illumination while in rev ? try adjusting the distance of the front sensor, i keep mine a short as possible.
  22. STORMIN08

    Opinions/experiences, 2" level tire size

    on an IFS front end, the level does not offer much in aid of clearance the way many think...like stated above. what fits in the wheel well at stock height is what will fit with the level. That said, possibly on a straight run, full bump situation...the level will keep the added tire height out...
  23. STORMIN08

    Raptor style grill lights

    far better look. Could the 2 outside lights be moved the next opening outward (would require trimming, but might balance a little better) ? But overall , still looks good.
  24. STORMIN08

    Opinions/experiences, 2" level tire size

    here is my 17 with a 2.5f/1.5r, this is a 285/50/22 (33.22" T x 11.2 W), i barely had trim the fabric wheel liner. No doubt, this could be one with a 2" level. i do think you have any worries.
  25. STORMIN08

    Cut/polish - new to me Tahoe

    i have used several on different newer gm vehicles.... and brand name that you can source will work fine, for dailys i hit local parts house for meguiars or 3m products. depending on how bad, the pad will make a difference too. if you dont mind 2 passes at least, grab a couple micro fiber pads...

Forum statistics

Threads
132,312
Posts
1,865,791
Members
96,905
Latest member
1badhg

Latest posts

Top