Search results

  1. Logan5

    2005 Tahoe Ls stalling

    Truck stalled while driving today, luckily I got it into a park lot with momentum before I had to stop. Won't restart, no engine light. Nothing visibly wrong, cranks, won't start. Making some weird sounds like it half starts then immediately dies. Can't figure out so I call AAA. Waiting around...
  2. Logan5

    What did you do to your NBS GMT800 Tahoe/Yukon Today?

    My Ivory dealer was backlogged so I had to go with the ‘hammered’ faux finish.
  3. Logan5

    What did you do to your NBS GMT800 Tahoe/Yukon Today?

    Exhaust manifold leak part 2. Unbolted the manifold again to try to see why its leaking from the gasket. Got a straight edge and checked to see if I had warpage. Found some corrosion that was giving me a gap. Doesn't look like much but it was enough to give me the leak. A little...
  4. Logan5

    What did you do to your NBS GMT800 Tahoe/Yukon Today?

    So here I was patting myself on the back for getting all those exhaust manifold bolts out and putting in the new ones, and today I found that I am leaking from the manifold right at the gasket. All the new bolts went in smooth so I know I am not cross-threaded, and I all the bolts are torqued...
  5. Logan5

    What did you do to your NBS GMT800 Tahoe/Yukon Today?

    Yeah I was joyed when they started to turn without breaking off. There's that moment when you start to torque it and its either going to turn or snap off. Super happy I got them out. I failed on the driver side though, left one bolt in the head and used the dorman clamp.
  6. Logan5

    What did you do to your NBS GMT800 Tahoe/Yukon Today?

    Tackled the exhaust manifold bolts on the passenger side today. First and last were broken. Took off all the spark plug wires. Fully unbolted the manifold and would have taken it all the way out but apparently the oil dipstick is laced through it. Thought about pulling out the dipstick but when...
  7. Logan5

    What did you do to your NBS GMT800 Tahoe/Yukon Today?

    Put the Dorman cheater clamp on to secure that rearmost part of the exhaust manifold. Was a b*tch to get in, went from underneath and put a bend in one of my wrenches to get it tightened. But seems like it worked and haven't heard the ticking since. Gotta say having a few crappy wrenches...
  8. Logan5

    What did you do to your NBS GMT800 Tahoe/Yukon Today?

    Heard an intermittent tapping noise so first thing I did was check the exhaust manifold bolts. 3 are missing heads. Driver side rear-most, and passenger side first and rear-most. Tackled the driver side today, got a felpro gasket and the ARP bolts. the 5 intact bolts came out fairly easy (I did...
  9. Logan5

    LED Brake Light Bulbs Will Disable Cruise Control on GMT800

    So I been running "painfully bright" LEDs on all my exterior lamps, headlights, brights, fogs, DRLs, brakes, turns, reverse, etc. The interior bulbs have been replaced with LEDs as well, but not bright whites, inside I went for 'Pimp Purple'. Anyways, I been running this setup for over a year...
  10. Logan5

    Something new to l-u-s-t after

    When I got the chance to grab an 06 cluster I took it, and I did it for exactly this reason. I hate the lcd prndl display, the clean LED indicators are much nicer. Those leds are integrated into the pcb, so changing them out for a different color is not simple, like changing out gauge bulbs.
  11. Logan5

    New user and new to Tahoe Ownership / Very reactive steering

    +1 vote for checking the alignment, I had this behavior and my alignment was toe-out. This also including having some wandering at highway speeds.
  12. Logan5

    GMT800 Loose Steering Fix No One Has Mentioned here or Net - Ten Minutes, NO $$$

    Heyyyooooo!! I did this today and my steering got better! I got about a half rotation on one and a full rotation on another. The only time I worry about my steering is on the highway doing 70-80. Sometimes the wind can push me around more than I like. Took it out today in high winds at 80...
  13. Logan5

    Question About Idler Arm

    I did the idler arm + pulley as well as the pitman arm at the same time and I didn't find the pitman arm to be that difficult. The trick was to loosen the gearbox bolts (just loosen, not remove), to give the pitman arm enough clearance to get the pitman arm puller tool on. Here is the kit I...
  14. Logan5

    Smell of gas…

    This is the way. Also drop the spare tire to give yourself more room. And you can get a little siphon pump very cheap.
  15. Logan5

    Smell of gas…

    I did it myself. It's feels more daunting than it is. I watched a couple videos of someone dropping the tank and then went and did it. Honestly wasn't too hard. Once out replacing the pump is not hard.
  16. Logan5

    Smell of gas…

    I had a hard to find fuel odor for a while. When I eventually found it it was the fuel pump. On the hard line before it connects to the plastic line. Had rusted a pinhole. That fuel pump sits down lower than the surrounding parts of the tank, so fuel can pool there and you won't see it until it...
  17. Logan5

    Blue Tint Windshield

    Recently had a rock crack my windshield. Called the auto glass place and after giving them my make/model info they asked if my windshield has a blue tint across the top. Was this an option for some vehicles? My tahoe doesn't have it. Anyone have a pic? Can I opt for the blue tint windshield if...
  18. Logan5

    2005 chevy tahoe

    My cousin had a similar problem it was the heater hose T. Those things have o-rings in them that go bad and you leak coolant slow and it can get inside the cabin.
  19. Logan5

    05 Escalade just hit 100k miles, ok to change tranny fluid?

    Be careful when refilling, the tranny fluid takes much longer to heat up than the engine coolant does. You can easily drive your car to operating temp but your tranny fluid will still be cold, causing you to overfill the tranny, which later when it actually heats up and expands is overfilled and...
  20. Logan5

    3 minor issues I'm hoping you can help with.

    Those heater core Tee 's can sometimes be a ***** to take off, stuck back up in there like that. I tried like hell to get one off without breaking that little white release tab. Then when I opened the new T it had a new white release tab.
  21. Logan5

    Driveshaft solved

    Yup. I just took a driveshaft from one tahoe and put it in another, went right in no problems. You do need to mind the orientation of the slip yoke to the drive shaft if you are changing out U-joints.
  22. Logan5

    Instrument Cluster PRNDL or Message Going Blank on you?

    When I got my hands on an 06 cluster I put it in because I like the LED PRNDL much nicer than the LCD.
  23. Logan5

    How to get rid of OnStar?

    Second the reco to just unplug the wiring harness at the Onstar control box.
  24. Logan5

    Remote start for 2003 Yukon

    Hate the factory Fob. Love the aftermarket Fob (Compustar). I made sure to get a 2-way remote with my remote start so the fob could alert me with a successful remote start. Also the aftermarket range on door lock/unlock was much much farther than stock fob.
  25. Logan5

    What did you do to your NBS GMT800 Tahoe/Yukon Today?

    Oh and the other shaft greatly reduced the whine/drone I was hearing. Not completely gone but down more than half.

Forum statistics

Threads
132,316
Posts
1,865,860
Members
96,909
Latest member
Screech

Latest posts

Top