Search results

  1. 02Z71Raven

    Engine Hot/AC Turned Off message

    It's not great looking, lol and it's only $5 and I'm a pro at wiring, soldering etc... I often replace them if they make uncomfortable. I'll try just the sensor first though and see what happens. Soldering in that spot isn't going to be easy, so it may be best to do them one at a time anyway...
  2. 02Z71Raven

    Engine Hot/AC Turned Off message

    Yeah, it came back. This time while I was driving. I'm going to replace the temp sensor and connector. I'll keep yall posted.
  3. 02Z71Raven

    Engine Hot/AC Turned Off message

    Cheap enough just to replace it yeah. I just don't understand why resetting the ecm would make it work again though.
  4. 02Z71Raven

    Engine Hot/AC Turned Off message

    I'm going to ressurect this thread because mine keeps doing it. I had already figured out that fuse 12 would reset it, but its back every time I get back in the truck. it is warmer now than it was in feb and my temp is at 210 when i turn the truck off and the fans are on till i take the key out...
  5. 02Z71Raven

    Interior Lights Dont Come On Automatically

    Would it make sense to just replace the switch? Anybody got a pn?
  6. 02Z71Raven

    Interior Lights Dont Come On Automatically

    I've tried the the dome over ride button in both the in and out position. No difference. Anywhere along the full turn, no difference. Just past the full turn where it clicks, lights all come on and stay on and won't go out. If the vehicle is off long enough they time out, but they all stay on...
  7. 02Z71Raven

    Interior Lights Dont Come On Automatically

    Manual says "if it is dark enough outside, the interior lamps will come on and stay on for 20 seconds or until the ignition is turned on." Mine do not. I can turn the over ride switch all the way clockwise and they all come on, but this feature as explained above, doesn't work. They don't come...
  8. 02Z71Raven

    2007-2014 Tahoe Picture Thread

    Both my toys are under construction.
  9. 02Z71Raven

    **solved** Remote Start on 08 LTZ

    That was it. The CEL was on before and now it is not and the remote start works perfectly. As always, you guys win again. Thanks for the help!
  10. 02Z71Raven

    **solved** Remote Start on 08 LTZ

    That may be the reason. I had a cylinder misfire due to collapsed lifter when I got the truck. I don't know if I've tried it since I had the motor rebuilt. I'll try it again, thanks for the feedback.
  11. 02Z71Raven

    **solved** Remote Start on 08 LTZ

    So I'm understanding this correctly, the remotes are programmed and will work for everything except remote start. Doors unlock and lock, auto lift gate and hatch work, but not remote start. And you're saying that the remote start feature won't work unless it's programmed by some other means?
  12. 02Z71Raven

    **solved** Remote Start on 08 LTZ

    I had to replace the remotes when I bought this 08 Tahoe LTZ. I got the ones with the remote start button and I have the feature enabled in the systems settings but I get no results from the remote no matter what I've tried. Is there a simple guide on how this works or a common problem with...
  13. 02Z71Raven

    2008 tahoe p0306 issue

    Injectors aren't too difficult to swap either. Check to make sure the connectors are clean and no signs of corrosion. I did all these things and then sent it to the shop and found a collapsed lifter had worn into the cam. I hope you have better luck.
  14. 02Z71Raven

    Need catalytic converters replaced prior to tune

    My buddy recomended welding in dynomax bullets because they look like cats for inspection. I'd rather have a high flow cat though. I'll check out those magnaflows 992dr mentioned. Any other suggestions?
  15. 02Z71Raven

    Need catalytic converters replaced prior to tune

    Don't know. Previous owner ran the vehicle for a long time with a misfire though, so I wouldn't be surprised. Cam was bad, alomg with bearings, lifters, push rods, rocker arms etc...
  16. 02Z71Raven

    Need catalytic converters replaced prior to tune

    Just got my truck back from the shop. Did a full break down of the 5.3, replaced just about every major component except the lower end. Stage 3 cam with DOD delete, but my mech says he can't tune it because I gave it to him with a full tank of regular gas. Not the only reason he wants to wait...
  17. 02Z71Raven

    ** solved** Rear window wiper is dead

    **solved** I replaced what appeared to be a good fuse with another fuse and it's started working. Don't trust a fuse that doesn't look blown!! So, I read through most of the threads I could find on the rear wiper, but couldn't find a troubleshooting steps guide. Mine is non-responsive...
  18. 02Z71Raven

    Lets talk about rust!

    Whoa, maybe I shouldn't be working on trucks, lol Thanks man!
  19. 02Z71Raven

    Lets talk about rust!

    This is what I see, no link
  20. 02Z71Raven

    Lets talk about rust!

    Where is this? That's exactly what I wanted to do. I have two friends with paint shops and wanted to lift the whole thing up and clean off all I could and the use the converter on it before I seal it. Then do the body work. I'm more interested in stopping it right now.
  21. 02Z71Raven

    Lets talk about rust!

    I knew I was making a mistake buying a truck with a title from Mass, but here we are. I do have some good donors in the salvage yard though if they'll let me chop em up for panels and I can get doors, fenders and lift gates if need be.
  22. 02Z71Raven

    Lets talk about rust!

    I found some of the rust converters and it looks like a decent start to at least begin the battle. I just need to find someone with a sprayer.
  23. 02Z71Raven

    Lets talk about rust!

    I've decided to keep this 08 ltz but after the motor work is done I really need to address the rust. This is a MA vehicle for some time, I'm sure, because I can't find much underneath that doesn't have rust on it. It's only starting to show up on the rear fender wells at the edges, but...
  24. 02Z71Raven

    Infamous P0303 with no obvious cause

    Went ahead and took it to an LS professional and found out I have a lifter with a flat spot on the roller. All parts are on order and we will be deleting the dod and throwing in the cam and then tune. My 10k truck just became a 15k truck, but I'm not mad, im going to find the silver lining in...
  25. 02Z71Raven

    Infamous P0303 with no obvious cause

    Connectors are all in the right place from what I can tell. None seem long enough to reach the wrong place and no other cylinders are producing codes. I assume a crank sensor relearn would require a tech 2? I don't have access to one right now but had considered purchasing one since I own and...

Forum statistics

Threads
132,321
Posts
1,865,947
Members
96,912
Latest member
Papaskip

Latest posts

Top