Search results

  1. Travieso

    Travieso Forged 6.0 Swap Build Thread

    I also picked up a 2011 GMC Denali 6.2 With 25,000 Miles Love this thing
  2. Travieso

    Travieso Forged 6.0 Swap Build Thread

    I know it's been long due for a update, Been so busy with life, I just finally had the time to work on the truck this past weekend here are a few pictures got the Katech oil pump lined up with ARP Bolts Oil Pan Lined up Shimming the oil pan Lugging everything from the machine...
  3. Travieso

    Travieso Forged 6.0 Swap Build Thread

    this is true, It took alot of my time, but I made sure all the bearings were seated and flushed, Rocker shafts moves freely in there, so I'm very happy.. definitely lots of time and work.
  4. Travieso

    Travieso Forged 6.0 Swap Build Thread

    Not much of an update but finally installed my COMP Cams Trunnions
  5. Travieso

    Travieso Forged 6.0 Swap Build Thread

    Thank you sir, I Think they were made by Belltech or energy suspension you could search for them on ebay or Amazon they are called low profile bumpstops.
  6. Travieso

    Travieso Forged 6.0 Swap Build Thread

    I Haven't posted here for a while been real busy with life and work, anyways here is an update of what was done this saturday to the short block finally buttoned up Ran into some issues with the Windage tray, Weren't lining up with the Oversized ARP main Studs so I had to break out the...
  7. Travieso

    Travieso Forged 6.0 Swap Build Thread

  8. Travieso

    OHSIXX's 2006 Denali Build

    So im not sure if you removed the rubbers pieces or not, lol Thanks !!! this is what I wanted to hear, I will now drop the rear hopefully get a full 1 inch like you and remove the Rubber isolators, by any chance I seen a couple of guys put rubber hoses on the coil, I Hope I dont need to do this.
  9. Travieso

    OHSIXX's 2006 Denali Build

    That set it off nicely man, That thing looks sharp Question for you, you said you removed the spacers on the coils? Does it make any noise of any? I was told that's why it's there in the first place.. IF it doesn't I could probably go a little lower on my truck on the rear
  10. Travieso

    OHSIXX's 2006 Denali Build

    Looking good boss
  11. Travieso

    Travieso Forged 6.0 Swap Build Thread

    Yeah I figured that but it would really bug me if I didn't paint it, The Alternator bracket has been painted Gloss black, I just gotta be careful putting everything back on, make sure I don't scratch stuff. The heads will be aluminum personally I wouldn't paint them.
  12. Travieso

    Travieso Forged 6.0 Swap Build Thread

    So I finally picked up the short block and did some painting I think it came out very good. This is how I pickled up the motor all wrapped up for me Spend about 1 hour making sure I masked everything and about 3 rolls of painters tapes, Wanted to make sure their wasn't any over spray inside...
  13. Travieso

    Travieso Forged 6.0 Swap Build Thread

    Here is a little preview of my short block, I'm picking it up tomorrow morning :chewie:
  14. Travieso

    Felix's Summit White 2005 Tahoe Z71 4x4

    lol looking good man and congrats on your NBS, You have similar exterior mods as me. Keep up the good work, Subscribed !
  15. Travieso

    Travieso Forged 6.0 Swap Build Thread

    Thanks man, yeah I plan on doing some rear and front suspension definitely going with Spoon rear Lower and upper control arms and the panhard bar when the budget allows. I should have a update on the motor sometime next week.
  16. Travieso

    My 2016 Escalade build

    Thanks
  17. Travieso

    My 2016 Escalade build

    do you have a link and would these fit my Eibach Sway bars?
  18. Travieso

    My 2016 Escalade build

    I noticed your Sway bar end links and swaybar bracket holders bushings have a nipple to grease them, By any chance do you have part numbers for these and are they interchangeable from 2003-2016? I need some for my 06
  19. Travieso

    Travieso Forged 6.0 Swap Build Thread

    Yeah That's the first thing I noticed compared to yours, lol Oh well this will be just a trail and error, Only reason why I put them on was because I already had them. Hopefully It wont hit metal to metal when the truck is loaded with passengers and cargo. I did take off the wheels I just...
  20. Travieso

    Travieso Forged 6.0 Swap Build Thread

    So I had some time off today and decided to work on the truck a little bit since I have some down time and waiting on the motor figure I would do something productive, Nothing big just routine maintenance Covered all Plugs getting ready to Pressure wash the engine Compartment there was...
  21. Travieso

    Fosscore's 2006 Tahoe Build Thread

    isn't their a hole already in there? or did you have to drill one to put the new bumpstops? Like I said it's been a while since I've crawled down there.
  22. Travieso

    Fosscore's 2006 Tahoe Build Thread

    I have mine that haven't been installed, I think I've had them for more then 4 years when i first dropped the truck, I gotta look underneath to see where I could put them at.. I think i have the dish type like this
  23. Travieso

    Wilwood 16" front brakes SOLD

    Those are very nice
  24. Travieso

    Travieso Forged 6.0 Swap Build Thread

    Correct I just didn't see the extra money for P & P Heads, I talked to a few machine shops and they agreed also, eventually when I upgrade the blower to something Bigger I'll get a nice set of heads to go along with it.. For now I think it should be more then enough with my current set up. So...
  25. Travieso

    Fosscore's 2006 Tahoe Build Thread

    i removed mine

Forum statistics

Threads
132,321
Posts
1,865,950
Members
96,912
Latest member
Papaskip

Latest posts

Top