Search results

  1. blurred

    Awful ride with 20's, great ride with 17's

    based on the miles on the suspension and what you are describing, I'd look into replacing the shocks as well as take a hard look at the pitman/idler arms. Check on the sway bar boots/end links while you're down there. The extra weight of the 20s leads me to these ideas. The suspension is...
  2. blurred

    Blurred's 04 Tahoe Z71 build - Mr. Greenly Greenerson

    It wouldn't be bad at all. I know a lot of people in Nashville area since I was there for about 14 years before coming out here to Washington for the last 3 years. And honestly, I plan to pull some big triggers on the Tahoe when I get back there and get set up. Well, might not be big on some...
  3. blurred

    Blurred's 04 Tahoe Z71 build - Mr. Greenly Greenerson

    i will be just outside Nashville.
  4. blurred

    Blurred's 04 Tahoe Z71 build - Mr. Greenly Greenerson

    So, i have not logged in for a bit, forgive my transgressions. Also, I have recently found Bumbu Rum and this post may not make sense... it's so delicious. i appreciate it. Haven't done anything with the Tahoe since these and just been racking up the miles. Picked up an 82 gs850 that im...
  5. blurred

    Custom Denali bumper?

    They have stainless steel mesh for plastic welding. Same page/company as above. That is great for strengthening the breaks.
  6. blurred

    Custom Denali bumper?

    Look up plastic welding. It will net you longer lasting results. Also this is the filler I've used. Very similar to the 3m stuff but much much cheaper. https://www.polyvance.com/Flex-Filler-1/2000-C/ And @HiHoeSilver is right, no metal bumper under there, more of a fiberglass frame.
  7. blurred

    Mr. Greenly, the Trans-Model Tahoe

    That's what happens when the available market isn't something I'd ever run. lol an attempt at being different amongst models that have been on the market for over a decade and a half
  8. blurred

    Mr. Greenly, the Trans-Model Tahoe

    @SRQYukon These were built from a set of vinyl rain gutters I found at Lowes or Home Depot. I heat them up and shaped them into an L, then cut and plastic welded them to the Z71 skirts. Bedliner and paint, along with a little filler was the final touch.
  9. blurred

    Mr. Greenly, the Trans-Model Tahoe

    Appreciations. I learned early that the small details are what really bring something together. I've still got to do some work on the grille to make it seamless to my eyes. Basically make it so all the parts look like they belong together. Thanks. Now if only mine had the go that a fullsize ss...
  10. blurred

    Fosscore's 2006 Tahoe Build Thread

    Here's to the coming many moons and many beers.
  11. blurred

    Fosscore's 2006 Tahoe Build Thread

    Yep. The quiet is nice as well as the time allotted to finish projects, but it lacks the normality of chaos, which is odd to hear, even when you're saying it.
  12. blurred

    Fosscore's 2006 Tahoe Build Thread

    That's not patience. That's life and little ones forcing a delay. Lmao
  13. blurred

    Fosscore's 2006 Tahoe Build Thread

    I really love your patience and am slightly envious lol
  14. blurred

    What did you do to your NBS GMT800 Tahoe/Yukon Today?

    I finished buffing, washed and waxed the hoopty... then I cleaned up mama's Explorer with the help of my oldest.
  15. blurred

    Blurred's 04 Tahoe Z71 build - Mr. Greenly Greenerson

    And a couple more
  16. blurred

    Blurred's 04 Tahoe Z71 build - Mr. Greenly Greenerson

    Oh and I took pictures yesterday. Today I buffed the body out and cleaned everything up. But I have no pictures of that. Lol
  17. blurred

    Mr. Greenly, the Trans-Model Tahoe

    Fenders are both cut out (upper section of wheel well) and rolled out to clear the upward travel. Why thank you..
  18. blurred

    Blurred's 04 Tahoe Z71 build - Mr. Greenly Greenerson

    So after driving this around, here's my planned changes for the future (some distant, some not-so-distant) 1. new wheels. Going to run either a 23 or a 24x11 with a -24 offset (roughly). These will more than likely be a set of forged 3-piece wheels due to strength, weight, and to get the right...
  19. blurred

    Blurred's 04 Tahoe Z71 build - Mr. Greenly Greenerson

    Only difference between the Yukon fenders and the Tahoe fenders is the line around the headlights. Simply put, they are cut/shaped for the taller headlight. Beyond that, everything is the same.
  20. blurred

    Blurred's 04 Tahoe Z71 build - Mr. Greenly Greenerson

    Thanks man. They look decent but it's not what I truly had in my head so it's back to the drawing board.
  21. blurred

    Blurred's 04 Tahoe Z71 build - Mr. Greenly Greenerson

    Thanks. I bolted them up along with the hood and fenders. lol. Very simple...
  22. blurred

    Mr. Greenly, the Trans-Model Tahoe

    thought I put that in there. 2.5" on all 4 corners and the wheels are 24x10s (+30mm) on 305/35s. Looking to try and run something along a 24x11 with a -24ish offset on either 305 or 295/35s.. depending on the height/profile I need for this. That will take some sciences and visualizations to...
  23. blurred

    Mr. Greenly, the Trans-Model Tahoe

    Right now its Bora spacers... future holds a new set of wheels And because the photos are dark on my (and probably everyone elses) phone, here are brighter versions
  24. blurred

    Mr. Greenly, the Trans-Model Tahoe

    ***Opinions welcome; rant or rave, by all means tell me what you think.*** While this isn't finished, it is at a stage where I can and will drive it for a while. This started as a project that I had never seen done, though as I progressed through the work, people started telling me and sending...
  25. blurred

    Blurred's 04 Tahoe Z71 build - Mr. Greenly Greenerson

    Yeah, it didn't work. Stupid Instagram not letting you host there and share...

Forum statistics

Threads
132,325
Posts
1,866,019
Members
96,926
Latest member
gb24

Latest posts

Top