Search results

  1. Searay45db

    Finding the ground? Cooked all of my 12v receptacles.

    Trying to find the wiring harness diagram. Any idea? I have it ripped apart. One works.
  2. Searay45db

    Finding the ground? Cooked all of my 12v receptacles.

    on my 2005 gmc yukon XL i noticed my OBD II port was not working. There was no power to the port and I checked the Cig fuse as that is really where the problem is. Nope it was fine. The other night, I lost use of everyone of my 12v receptacles. When I pulled each on of them out, each one...
  3. Searay45db

    05 Yukon dash lights don’t work bu gauges work

    U I hate to say it, but in the long tin, taking it to the dealer is cheaper than buying a new truck.
  4. Searay45db

    05 Yukon dash lights don’t work bu gauges work

    Ok, so for me, after a new switch didn’t work I ended up foing into the back of the LP box using the schematic for the wires and literally reseating everything. It sucked. When I was done, I had all,of my dash lights working. Unfortunately I still don’t have my interior lights on, makes no...
  5. Searay45db

    No power at fuse block...where next?

    On my 2000 GMC Yukon, I have not interior lites or dash lites. There is no power at the sources, fuse is ok, but there is no power at the fuse block either. next place to check? Power Wire coming in? Schematics stop at the block. Is this controlled at the Door module?
  6. Searay45db

    05 Yukon dash lights don’t work bu gauges work

    Do your interior lights work?
  7. Searay45db

    Strange starting issue 2004 GMC Yukon

    Ok, yay got to,do better than this. Use a volt meter, to better yet, get a power probe III. Saves you a lot of time. Since you can set this up everytime, before you turn the car off, our up on ramps or jack stands. Don’t use a jack, don’t want your head squashed. Now go ahead and try and...
  8. Searay45db

    Did I just get ripped off?

    I had three brake lines replaced. It came to $850 bucks. Everyone else quoted around $500 but could not do it for a couple of weeks. When I looked at the work, it sucked. Went to the RM. he used Mitchels for labor. Is Mitchel the high book they use or is it fair? Another book?
  9. Searay45db

    My Heated Seats started turning themselves on...

    Right, that takes care of turning on, but How did I diagnose?
  10. Searay45db

    My Heated Seats started turning themselves on...

    I just did a 5 hour road trip. It really sucked. It was a constant battle. The only way to get to the loom is to take out the seat and then the carpet and center council. All the wires are green. Where is the door master switch?
  11. Searay45db

    My Heated Seats started turning themselves on...

    This is a possibility. Could not remember if the loom went on top or below. Geeze this is going to be a PITA to find!
  12. Searay45db

    My Heated Seats started turning themselves on...

    Why did you do that? You think the Heating element is bad? Both the top and bottom turn on.
  13. Searay45db

    Any ideas what is this inside my door?

    I bought a used door for my 2000 GMC Yuki. I got a 2003, and there is a part in my door that is not in the 2003. I Have no clue what it is. If you look at the pic, where the courtesy light cable goes over, and it has the two black torque bolts, bottom right, it even has a plug for it...
  14. Searay45db

    My Heated Seats started turning themselves on...

    My 2005 Yukon Denali has decided to start turning my heated seats on when I start it. I turn them off, and then it dies it again, and again and again. Don’t know why. This happened after I took all of the seats and carpet out to put in some sound shield. 6.0L are loud. I do have a remote...
  15. Searay45db

    NewHigh Pressure Steering Hose laying on the steering column....where did I go wrong ...Denali Guys!

    Well, this takes the cake. Unfortunately the 5.3 guys probably can't help me because it's a different set-up. I know, I looked at mine. Had to replace the line coming out of the Booster going into the back of the reservoir. Normally I pay pretty close attention as to how it runs down, but I...
  16. Searay45db

    The Transmission Indicator is out on the dash

    Yeah, they got dim over time. It's an 05. Below is also LEDs to give me those special messages.
  17. Searay45db

    The Transmission Indicator is out on the dash

    Well, I know I am not the first, not the last, but the lights telling me what gear I am in are gone. I had heard you could cold solder it if they kinda worked, but not really sure they kinda work. Options? 2005 GMC Yukon XL Denali
  18. Searay45db

    Is this what a bad timing chain looks like?

    Ok, I van upgrade to deal cogs, heavy duty for a total of $99 bucks complete. Do I really need too because I have not changed compression? No, but will it last longer? More reliable?
  19. Searay45db

    Is this what a bad timing chain looks like?

    I have already bought an upgraded chain. $30 from Summit. If it's really loose, I would replace the gears. But if you are telling me that its not bad, I will just replace the chain.
  20. Searay45db

    Is this what a bad timing chain looks like?

    Try it now. Just worked for me.
  21. Searay45db

    Is this what a bad timing chain looks like?

    As I continue my project on low oil pressure, and I found the problem, it was the piston inside the oil pump. It's stuck, I had bought a new timing chain. Why not. But this seems a little loose to me. Thoughts?
  22. Searay45db

    No oil pressure at start up, 2001 Tahoe

    And here are the pics from inside the engine...no idea if they are any good... yeah....I'm at 150 on my 2005...it's the age....I guesss
  23. Searay45db

    No oil pressure at start up, 2001 Tahoe

    Ok, so I can't get a GM puller, so the Chrysler one will have to do. Since I am removing the starter, thoughts on replacing it? It's the original, do these usually last forever and very reliable?
  24. Searay45db

    No oil pressure at start up, 2001 Tahoe

    Yeah, I am committed. I dropped the pan last night. The o-ring did not look that bad. Taking the front off.
  25. Searay45db

    No oil pressure at start up, 2001 Tahoe

    Why did you go with the HP pump? I read that you do it if your not building up enough oil pressure, is there really any down side? I have the pan off right now. On the 6.0 with electric fans, is it that much more work to do the pump or is it still a ***** to do? Kind of 50/50 on this. Only...
Top