Search results

  1. mizzouguy

    Confirm part #'s zw7 conversion...

    https://www.gmpartsonline.net/2004-chevrolet-tahoe.html According to the diagram on this site, gm lists the following options: w/o z71 w/o zw7 15182554 <<<<<<STANDARD w/z71 w/3rd row 15182558 w/z71 w/o 3rd row 15182559 w/o z71 w/zw7 15182560 <<<<<<WHAT YOU HAVE NOW I didn't realize there were...
  2. mizzouguy

    Belltech Spindle Clearance

    I have had belltech 2" drop spindles on my truck for a year or so now, and just switched back to my 17" wheels for winter. I have an 04 LT. The jamb nut they supply with the spindles only threads on the acdelco ball joint evedently, had to go to fastenal and order a new jamb nut for my moog ball...
  3. mizzouguy

    Need info

    Check engine light came on. Most people do both and the harness while they are in there. Do a search on here.
  4. mizzouguy

    Lip or no lip?

    DITTO. Ties in well with my plastic running boards and flares.
  5. mizzouguy

    Need info

    They are on top, directly under the intake manifold, just like the 5.3. Chances are when they changed the intake gaskets they pinched a wire or something going to the knock sensors, there are two.
  6. mizzouguy

    Confirm part #'s zw7 conversion...

    A lot of guys run moog z-71 springs with bill stein 5100 shocks, or whatever you want really. If you don't want the extra height from the z71 springs you can run the standard moog ones with whatever shocks you'd like. As long as you get rid of both the zw7 spring and shock you are good.
  7. mizzouguy

    lower ball joint replace or new control arms? 85k

    I just changed upper control arms and lower ball joints on my 04 with 135k. Left lower control arms alone and just pressed in and out moog ball joints, didn't wanna mess with torsion bars. Bushings still looked good and they dont squeak. For what its worth, I'm not impressed with moog's new boot...
  8. mizzouguy

    Transmission Fluid Flush??

    Dear god dont use an electric drill/impact when you put it back together and criss-cross as you tighten it down. LOL
  9. mizzouguy

    fuel sending unit/fuel pump

    Ignition control module? Coil? Crank position sensor? Trying to think of electronic things that dont like heat that could kill ignition momentarily.
  10. mizzouguy

    How to keep fog lights on automatically?

    ^^ Thats what I did on my 04, only I used the trigger pin for the low beam relay and ran a diode from there to my fog relay. In the winter I also run a diode from my high beam relay to my low beam relay, so that when the weather is bad at night I can put on my highs and all 3 stay on.
  11. mizzouguy

    Transmission Fluid Flush??

    I've had good luck with oreilly stuff, they have powertorque (off-brand), wix, and access to gm parts in their warehouse as well. They also stock the fitting that screws into the radiator, and some clear hose. If its newer than 06 it takes dex-vi. Older takes dex-iii, or you can upgrade to the...
  12. mizzouguy

    Misfire #7 cylinder

    Coil? Swap number 7 coil with another cylinder and see if the problem follows.
  13. mizzouguy

    Oil change without jacking car?

    If you can get the nose end uphill a little, as the oil drains out the pan it may just miss running all over a skid plate just below the pan lol. Plus it helps it drain easier out of the flat bottomed pan. LOL I thought flat bottomed girl as i typed that. Anyway, yeah if you can fit under it you...
  14. mizzouguy

    SYLVANIA H11 SilverStar zXe Experience

    I've used the zxe's before. While not in the same league as HID light output, they are noticeably brighter and whiter than stock.
  15. mizzouguy

    Transmission Fluid Flush??

    He's an ass, working off commission. Your owners manual is the key here...follow it and you wont have issues. However, changing it more often won't hurt anything either. I agree with all previous advice on here.
  16. mizzouguy

    Oil pressure pegged at 80 all the time.

    I just did mine, a mirror on a stick helps you get a good idea of what you have to do. I used an oil pressure sending unit socket on a swivel, and then a 12 inch extension to my ratchet up above the hood line. The only thing I had to unhook was the electrical connector on the switch itself, and...
  17. mizzouguy

    Oil pressure pegged at 80 all the time.

    99% of the time its the sending unit. Don't go tearing into the dash first, do the sending unit.
  18. mizzouguy

    Bought a travel trailer

    1. Weight distribution hitch will make it tow much better. Fluid change isnt a bad idea, motive makes a good bleeder set up. I think stock brakes are fine. Id wait until they are due next time and go better then. 2. I'd pull the pan, do filter and fluid, maybe replace with a deep aluminum finned...
  19. mizzouguy

    Switches, Relays, Wiring

    I'd be concerned that one individual relayed acc would not draw enough to blow a single large fuse, so if you had to put like a 40 amp fuse to allow all 3 relays to run at the same time, and one of your switched accessories had an issue, it would start doing damage before it blew the fuse. Id...
  20. mizzouguy

    2004 Tahoe Parasitic Battery Drain

    @Flicka no sorry I do not. I don't know what else is on that circuit.
  21. mizzouguy

    2004 Tahoe Parasitic Battery Drain

    I have the stock radio on mine, along with an aftermarket amp, and you have to be careful when you choose a amp remote wire. The radio and security system work together so every time a door is opened or the fob is used the radio powers up. But if you dont have an amp you wouldnt have that problem.
  22. mizzouguy

    Question about the auto 4WD

    Auto 4x4, in my experience, sucks lol. I have it as well. Even when in that mode, it will stay in 2wd until it realizes you are sliding via wheel speed sensors. Then it will try to redirect power to the front, and when it does so one front and one rear will spin. If the weather is bad, I always...
  23. mizzouguy

    Tire size recommendations please

  24. mizzouguy

    Tire size recommendations please

    Sumitomo HTR Sport
  25. mizzouguy

    Tire size recommendations please

    I am lowered 2/3 and have 275/55R20's. It doesn't rub currently but its sooooo close to rubbing the front of the wheel well when I'm at lock or close to it. Anything AT or bigger and I'm afraid you'd have to trim some plastic. EDIT: I'm not sure what my offset is tho...

Forum statistics

Threads
132,381
Posts
1,867,147
Members
97,024
Latest member
gbc60

Latest posts

Top