Search results

  1. V

    01 Denali Transfer case problems

    I’ll have to check that out
  2. V

    01 Denali Transfer case problems

    No codes and i first changed it back in august when it first happend. But I never had a problem in the winter. I just changed it again a few days ago when it acted up again. No loss of fluid
  3. V

    Front Diff. Issues

    I’m having this issue with my 01 Denali currently. It’s the AWD model so there is no switching and I believe my transfer case is going out because my front wheels are gripping the pavement a very slow turning speeds like a parking space or drive way.
  4. V

    01 Denali Transfer case problems

    Sup all. Need some help/input on my ride. I have a 2001 GMC Yukon Denali 6.0 (not XL) with under 200k miles. I seem to be having issues with my transfer case. The truck is always in AWD so there is no switching between 2 or 4. And when ever the outside temp is close to 90 or my trans temp...
  5. V

    Sway bar links and bushings question

    No instructions just the bushings in a box. I did re use the old ones and put only a dab of gease to coat it this time
  6. V

    Sway bar links and bushings question

    Question. So I measured the sway bar with a caliper and put in the new bushings but after a week the driver side has some play in it. Should I try and go down to the next size bushings? I used the moog brand again
  7. V

    Sway bar links and bushings question

    I seen those but haven’t ordered yet. Need to get my transfer case looked at and an estimate done next to decide if I’m going to keep her or try to trade her in.
  8. V

    Sway bar links and bushings question

    I finally found the time to change my bushings out. What could cause my bushings to look like this after 6 months. Pretty crazy
  9. V

    Sway bar links and bushings question

    That I did not. Which would make sense to why it wore out so fast. I’d be happy with the fact of not greasing it caused the failure and not something else.
  10. V

    Sway bar links and bushings question

    Not bad. They have a lot of good products
  11. V

    Sway bar links and bushings question

    Yeah I used a caliper to measure my diameter. I’m able to wiggle the sway bar with my hand back and forth. I can tell that the bushings are no longer tight around the bar.
  12. V

    Sway bar links and bushings question

    Sup all. So I have. 2001 Yukon Denali awd with 195k on the dash. I recently converted the air ride to a strut master kit since both my back shocks and compressor were busted. I also replaced my front sway bar links and bushings since they were cracked. Not 6 months later the bar bushings are...
  13. V

    Washing with hard water

    Which model do you use?
  14. V

    Washing with hard water

    Hey does anyone who lives in an area with hard water wash their car at home? I always take my car to the local car wash but would love to do it at home. But last time I did this I had water spots on it that took for ever to remove. I have a water softener but is there anything else I could do...
  15. V

    01 Yukon brake master cylinder fix

    That’s what I ended up doing. Win some and loose some.
  16. V

    01 Yukon brake master cylinder fix

    Yeah the whole abs thing is what I was worried about. I might just chuck this one up and let them fix it. Thanks for all the input
  17. V

    01 Yukon brake master cylinder fix

    Sup all. So I noticed my pedal going down further than usual so I figured I neeed brakes since it’s been about 2 years. Well I changed all my pads which still had meat on them and my pedal still gradually went down to the floor. So now I thinking it’s the master cylinder. I’ve watched a few...
  18. V

    Let Me See Your Tahoe, Yukon, Or Denali!

    2001 Yukon Denali on 28s IG Ventura139
View older results

Forum statistics

Threads
132,380
Posts
1,867,058
Members
97,017
Latest member
97ext

Latest posts

Top