Search results

  1. S

    Electric Suburban / Electric Tahoe / Yukon / Escalade EV

    Good point. Proven fact is take all combustion vehicles off the road and it reduces pollution by about 6 to 8 percent. The source is from agriculture. Before we didn't have this large a problem. With other countries that didnt produce as much meat and world overpopulation it's clear. Sent from...
  2. S

    2015-2019 5.3 any good?

    Not sure but heard from a mechanic I worked with he said up to 2013 was iron block and anything after aluminium. Sent from my LM-V600 using Tapatalk
  3. S

    2015-2019 5.3 any good?

    But I had heard that gm stopped using iron bocks. Is that only the 5.3 that has an iron block? Sent from my LM-V600 using Tapatalk
  4. S

    2007 Tahoe 5.3l AFM DOD delete thread

    Should put a legend at the bottom. Lmao. Did Lfm Tbl Lrp Cgw No idea but what these mean Sent from my LM-V600 using Tapatalk
  5. S

    2002 5.3 intake manifold gasket replacement.

    I had my knock sensors replaced last year. So while they were at it got a kit of gaskets for 140 dollars that replaces all the intake manifold ones. I had quite a few that were shot. I would suggest you replace all those as well. It was worth it in mine had lean codes coming up. Now all good...
  6. S

    4l60e problem

    Sorry that was a knock sensor I was explaining. Bad news my trans needs a rebuild but they guy uses the valvetrain kit I bought. Seems the trans uses one band for 2nd and 4th gear. He verified that it is only using 1st and 3rd which are on another band. Sent from my LM-V600 using Tapatalk
  7. S

    Weird Issue Hard To Explain

    I don't have any error codes on my 04 yukon denali and yet it won't shift from first unless I let off the throttle. So I bought a transgo kit and talked to a shop today and he said I don't have a second gear because he was shifting manually. I have tested my tps but seems fine. But yet others...
  8. S

    Feels like something slips, but only at part throttle

    I have an 04 yukon denali and I cannot shift properly WOT. But if I let off the throttle it will shift fine. I was suggested to buy a transgo kit to fix this problem. I went to a shop today and a tech did a test drive and said it is shifting from 1st to 3rd you don't have a second gear. Yet...
  9. S

    4L60E delayed 2-3 shift after WOT application?

    I have a 2004 gmc yukon denali xl with a 4l65e. It is very similar. I have about the same problem if I let off the throttle it shifts fine. So I ordered a transgo kit to fix the problem. Today I went to a trans shop and they had a guy from the shop test drive with me. He said you don't have a...
  10. S

    Transmission problem?

    Well a shop I went to today has doubts. He said I don't have a second gear. All we know is if shifted manually it seems to shift from 1st to 3rd gear. Any ideas? And yet another person on the yukon forum had my symptoms and it fixed the problem. Sent from my LM-V600 using Tapatalk
  11. S

    4l60e problem

    Hi I bought a transgo kit for my 04 Gmc yukon xl. It delays shifts. If you let off the throttle it will shift. It doesn't make noises but seems to downshift fine but delays the shift. I did see someone on here try this kit for the symptoms I have and it worked. I went to a transmission shop...
  12. S

    My power fold mirrors are dead

    I never had a scan tool. Just had found a post on the forum about grounds and all my locks and windows work without a problem. Best is to use a dremel tool to clean the grounds but if all you have is sandpaper that will do. Never had a problem since. I would lose power to mirrors or locks then...
  13. S

    My power fold mirrors are dead

    I would still check the grounds under the driver's door first might save you some money. It's right on the body just need a screwdriver and clean those first. Sent from my LM-V600 using Tapatalk
  14. S

    My power fold mirrors are dead

    Since it's both mirrors most likely the ground contacts under the driver's door. Just in one raised rail. Clean both contacts. Mine were rusted and that happened to me as well as losing power to door locks. Hasn't done it since. Sent from my LM-V600 using Tapatalk
  15. S

    My power fold mirrors are dead

    Just need some wrenches and sandpaper or a dremel like I used. My cd changer never worked but lost power to the stereo and the mirrors would lose power intermittently. Just clean the 2 grounds under the driver's door. That should help. Mine were rusted bad. Soon as I did that power all the time...
  16. S

    My power fold mirrors are dead

    Just got my stuff in to fix my yukon. I am removing the poor ground for the battery with new #2 guage cable and other ground under the hood. As well the transgo is to fix the soft shifting my yukon has had. I have to let off the throttle to get it to shift. I was informed to use welding cable...
  17. S

    My power fold mirrors are dead

    Also check under the driver's door underneath the body there are 2 grounds to clean. I cleaned those after my stereo lost power and works great now Sent from my LM-V600 using Tapatalk
  18. S

    Is my AWD Escalade rearend junk?

    I would be shocked if your rear end is shot. I have an 04 Gmc Yukon Xl with 370,000 kms on it. The rear end is original. I have had the fluids changed a few years back in the whole drivetrain just to ensure it would keep running. They are really tough. Who knows but hopefully it's not the rear...
  19. S

    Paint protectant

    Even the wax from Napa that you can get in a gallon jug is good. I did mazda protege and it took the auto body guy an amazing amount of grinding to take off the wax to fix a dent. I polished it twice a year. Sent from my LM-V600 using Tapatalk
  20. S

    Shift Kit or Rebuild Kit

    I ordered the rebuild kit tonight in a couple weeks having it installed. I have to let off the gas then it shifts otherwise it will go to 5000 rpm. I was told the transgo will fix transmission shifting problems. From what I think is the valves in the kit synchronize the gears for shifting...
  21. S

    4l60e problem

    Check Amazon they have a kit with all the rebuild parts for the transmission. Good news is the kit installs after you drop the transmission pan. I ordered one for my 04 denali that has the 4L65E. It also does the 4L60E. Less that 100 dollars. Hope that helps My 04 has 370,000 kms now. Had...
  22. S

    4T65-E Transmission Clunk, B Platform Lucerne (impala)

    There is a kit on Amazon. It services 4L60E as well as the 4L65E which I have in my 04 denali. Mine is slipping I have to let off the gas for it to shift. I checked and saw on a forum quite a few people recommend it. Sent from my LM-V600 using Tapatalk
  23. S

    Transmission problem?

    Finally found out the transmission just needs new valves replaced on the bottom. It's a transgo kit I found on amazon. The valves synchronize the transmission! Just drop the oil pan they are right there! Sent from my LM-V600 using Tapatalk
  24. S

    Recommend Me A Transmission Rebuilder in the Atlanta Area

    I am surprised. I have my 4L65E that is slipping. Ordered the transgo kit on Amazon and less than 100! Just have to wait 2 weeks and it will be fixed. Sent from my LM-V600 using Tapatalk
  25. S

    Tonyrodz's Tahoe Build Thread

    I also sprayed mine with undercoating to prevent rust and the grounds still work good. Sent from my LM-V600 using Tapatalk

Forum statistics

Threads
132,384
Posts
1,867,199
Members
97,030
Latest member
pipehand903

Latest posts

Top