Search results

  1. Michigan

    Can I level front with bilstein 4600

    Spoke with 2 shops today that said they actually wouldn’t even touch it with the chance of the keys being rusted in. How bad does this rust look? Or is it just surface rust. Also for front end leveling was told that I’d need to change the upper control arms and one shop said he’d just leave it...
  2. Michigan

    Can I level front with bilstein 4600

    Also is it possible to tell if the torsion bars are cranked from these pics? When I purchased it 7 years ago the guy was running 275/60r20 on it so he might of cranked them before. I’m just not sure how to tell exactly
  3. Michigan

    Can I level front with bilstein 4600

    Just a lot of misinformation out there even with the seller that I purchased them through. He says 5100 are for lifted vehicles only and will not fit stock height but if I’m understanding correctly 0-2.5 lift means “0” is stock height correct? And I have read that they are the exact same shock...
  4. Michigan

    Can I level front with bilstein 4600

    Thanks for the responses I’m starting to think I might of made a mistake and just went with the 5100 series since they make them to be fitted from 0-2.5 lift so even at stick height they would have worked and would have had the option to level later or now. I could still return the 4600...
  5. Michigan

    Can I level front with bilstein 4600

    I have an 04 Tahoe Z71 with the z71 suspension (springs in the back) no auto ride It’s a daily driver, mainly freeway, no towing or off-roading. I just ordered the 4600 series, Can I still level the front end with this model? If so what is the best way? Stock torsion keys cranked up or...
  6. Michigan

    What to do with the roof of my 2003 Tahoe

    I just realized my roof is horrible but the rest of the body is clean. How bad is my roof and what is the best approach? Anything that can be done as diy or too far gone? I honestly won’t have the time or place to sand it down and much prepping. Can you just simply use some spray on it? What...
  7. Michigan

    Best place for instrument Cluster repair?

    Automotive circuit solutions did a very nice job on the cluster. I can’t remember the turnaround time but want to say a week from time I shipped to receiving For me that did not fix my parasitic draw though after 2 shops said that was the problem but after the cluster rebuild my battery was...
  8. Michigan

    Need help to set suspension for LT285/17R17

    Thanks for the response So maybe I should get the bilstein 4600 and leveling keys from the get go and be safe along with the other suspension parts. I do plan to keep it for a while. Or the 5100 if those have a better purpose for me I’m going to look for an AC Delco kit for these trucks...
  9. Michigan

    Need help to set suspension for LT285/17R17

    Hey everyone, so I’m currently running 275/55R20 on my 04 Tahoe Z71 4x4 and came across a good deal on some LT285/70R17 10ply load E that I bought I have been doing some research on here and some people say that these will fit on stock (Z71) and some say they will rub. I am looking for a set of...
  10. Michigan

    Battery drain

    I’m actually not that I bought a brand new alternator from advanced auto parts Carquest 8292AN Is the part number for it and it actually had the same exact brand in there from 2006. I have not cleaned all the grounds but I should look into that I feel like this should resolve my battery...
  11. Michigan

    How to adjust hood to close gaps

    Sorry I was trying to delete my post. I tried the passenger side rubber stopper this morning and it adjusts fine but drivers side goes up but does not go down past a certain point Anyways I don’t think the rubber stoppers are the issue anymore after adjusting them, there is still a gap on the...
  12. Michigan

    Battery drain

    Thanks for the tips and advice, So since my last post, the battery kept dying, I did try leaving the battery disconnected for over 24 hours to research the bcm to go to sleep and still had dead battery I took it to another local shop and they said the only draw they were getting was a draw...
  13. Michigan

    How to adjust hood to close gaps

    Stupid question but how do you adjust these rubber stoppers? Mine will not move at all by hand I just had the HD hood swapped today and it didn’t line up correctly but also my oem hood was not lined up correctly either. Actually the HD hood is not as bad as a gap I’m trying to figure out if...
  14. Michigan

    Hood Insulation

    Same question pretty much. I just bought an HD hood for my 04 Z71 and it came without insulation. Will it actually ruin your paint or any other negative affects? How has it held up for those that ran without the insulation for a long period time? Thanks
  15. Michigan

    Trying 285/70R17... Load C any good?

    Very nice, how are you liking this setup? I have an 04 Tahoe Z71 with stock suspension Currently running 275/55R20 hankook dynapro I found a good deal locally on some Nokian Rockproof LT285/70R17 Load range E, 10 Ply Do you think these will fit my Tahoe without rubbing? How do you think...
  16. Michigan

    285/70/17 without suspension modification 04 Z71?

    I know this is 14 years later but for those of you that have ran this size, have you had any issues? I have a 2004 Tahoe Z71 with stock suspension I’m looking at a set of Nokian Rockproof LT285/70R17 for a good deal locally. Will they have any rubbing issues? From searching, I’m seeing some...
  17. Michigan

    Window switch or motor with video

    I had the alternator replaced a couple of days ago due to a bad diode and now the window has been rolling up and down fine. Do you guys think it’s safe to say that was the problem? I’m just paranoid about rolling it down now and it not going back up
  18. Michigan

    Window switch or motor with video

    I’m Sheesh that looks like a tough job for someone like myself that is not so mechanically inclined and good with tools. How much do you think an independent shop would charge for this job?
  19. Michigan

    Window switch or motor with video

    I was rolling my drivers side window up one day last week and it made this clicking noise as it was going up, it rolled all the way up and parked Next time I got in, window wouldn’t roll down or up and no sound or click of any kind for drivers side but all other three windows roll down and up...
  20. Michigan

    Alternator need replacing?

    So my 2004 z71 has had a string of electrical problems January 1st this year I had a new battery replaced under warranty as I had it in a few shops for parasitic draw The new battery did drop to about 2 volts but recharged it and a shop had told me that I had a parasitic draw coming from my...
  21. Michigan

    Replacement Ignition Key

    Appreciate the advice
  22. Michigan

    Replacement Ignition Key

    Would it be ok to make a copy of the copied key? I believe I have lost the original as I haven’t been able to find it for over a week. I’m hoping the only copy I have is cut good enough to make another copy. It doesn’t necessarily have to be the original key to make a copy correct?
  23. Michigan

    Best place for instrument Cluster repair?

    I was getting ready to send mine in to them but unfortunately they are getting ready to go out of town till March 24th I believe it was. I sent it off to automotive circuit solutions today. Kind of found them last minute and they had the best price and good reviews. I usually don’t cheap out...
  24. Michigan

    Best place for instrument Cluster repair?

    Thank you all for your responses I’ve narrowed it down between https://www.gmgaugerepair.com/product/2003-to-2006-chevy-tahoe-complete-cluster-rebuild/ and Circuit Board Medics Anybody use gm gauge repair? Also is the transmission gauge worth getting? And what LED color do you guys prefer...
  25. Michigan

    Best place for instrument Cluster repair?

    I have the 04 Tahoe Z71 I’ve had a parasitic draw for a while and now being diagnosed that it’s coming from the instrument cluster. Everything functions on the cluster aside from the PRNDL being illuminated I’m in Michigan. Anybody have a recommendation to rebuild locally in Michigan or the...

Forum statistics

Threads
132,391
Posts
1,867,347
Members
97,041
Latest member
sirtho49

Latest posts

Top