Search results

  1. Justinj360

    Clunk/ rattle steering or suspension

    Nope. Great... I just installed the Dorman...
  2. Justinj360

    Clunk/ rattle steering or suspension

  3. Justinj360

    Clunk/ rattle steering or suspension

    And/or the steering bearing. Might as well replace both at the same time.
  4. Justinj360

    Clunk/ rattle steering or suspension

    This is my first time will Bilsteins and man what a difference on the first ride! Although to be fair the shocks I was using before weren't quite right for my truck.
  5. Justinj360

    Clunk/ rattle steering or suspension

    So my issue turned out to be my shocks/shock extenders for my leveling kit. One of the bolts for the extenders was loose. Also, I recently found out the Monroe shocks I was using weren't the right ones for my truck. They bolted up and everything but they weren't compatible with my "premium...
  6. Justinj360

    Looking For Rearview Mirror Wiring Diagram

    I found this on BBB Industries. There were 2 options with small differences and this is for a 2004.
  7. Justinj360

    Looking For Rearview Mirror Wiring Diagram

    I'm looking for the rearview mirror wiring diagram for a 2004 GMC Yukon with a fully loaded mirror (OnStar, auto dim, comp/temp). Can't seem to find anything about it. By the way, where do you guys usually find your wiring diagrams? Thanks.
  8. Justinj360

    Corvette Servo Questions

    That's correct, the one with no grooves is the longest factory pin. It's 3/32" longer than the medium pin with 2 grooves. I still have plenty of room in my servo pack to compress the cover with the longest pin installed. No grinding needed.
  9. Justinj360

    Corvette Servo Questions

    Happy to help. Yes, all original on mine.
  10. Justinj360

    Corvette Servo Questions

    Now I am by no means a transmission expert. But I do know that installing that corvette servo was one of the best, cheapest, and easiest upgrades I've done to my truck. It was one of the first things I installed in it. I bought my truck over 4 years ago with 130k miles, one owner, bone stock...
  11. Justinj360

    Pitman Arm Shaft Seal

    Thanks for the info, now I'll sleep a little better at night.
  12. Justinj360

    Steering Angle Sensor Reset After Steering Rack Replacement?

    My dealer was able to confirm I need a new sensor. It sounded to me like they tried to reset the modules that the angle sensor connects with and that didn't work. I think they also said the angle sensor itself can't be reset. That seems crazy to me but I don't know a whole lot about them...
  13. Justinj360

    Steering Angle Sensor Reset After Steering Rack Replacement?

    I wouldn't have to if people would come back after a while and share what they found out. Okay so long story short I just replaced my pitman arm on my 2004 and I ended up having to remove the intermediate steering shaft to get the steering gearbox back into position. When I did that I wasn't...
  14. Justinj360

    Steering Angle Sensor Reset After Steering Rack Replacement?

    Did you ever get this figured out? I think I may need to do the same on my 2004.
  15. Justinj360

    Pitman Arm Shaft Seal

    I don't think there's any tears, just the top of the seal closest to the pitman arm is messed up. So you think the seal rotates with the shaft? I'll have to test that. If I was going to use a sealer I would put it in the outside groove of the seal just so you know.
  16. Justinj360

    Pitman Arm Shaft Seal

    Probably not but I'd rather be safe than sorry... I also don't know anything about steering gear assemblies. I'm having a hell of a time tracking this thing down so I might have to improvise. Could I use some gasket maker or something to help seal it?
  17. Justinj360

    Pitman Arm Shaft Seal

    It's definitely the pitman arm. It's on the driver's side. I already replaced the idler arm and the bracket.
  18. Justinj360

    Pitman Arm Shaft Seal

    Thanks for the help but those all look different than mine... I looked at one of those in person at AutoZone and I couldn't make heads or tails of it. And I don't see where a snap ring would go. Could the seal have been revised that drastically?
  19. Justinj360

    Pitman Arm Shaft Seal

    I need to replace the outermost seal on the shaft for the pitman arm. I damaged it when using a torch on the pitman arm. I don't know what to call this thing but it looks to be a grease and dirt boot to protect the bearing inside the steering gear. Anyone know where to find one? AutoZone and...
  20. Justinj360

    Auto Climate Control Blows Hot On AC in Rear

    Is there one or two blend door actuators for the rear? Just getting started with diagnosing my own rear HVAC issue.
  21. Justinj360

    2003 Yukon AC not blowing cold

    Can the rear HVAC be reset like in the video or does it reset the whole system when you use that method?
  22. Justinj360

    Pitman Shaft Nut - where to buy

    What size is that nut?
  23. Justinj360

    Corvette Servo Questions

    I made a mistake, the pin with no grooves is in fact a little bit longer. I didn't compare them closely enough. The long one is about 3/32" longer than the pin with two grooves. I thought it would be more noticeable than that.
  24. Justinj360

    Vette servo problem

    Old thread, I know. But which one is the overdrive plate? The outermost one for 4th gear?
  25. Justinj360

    Corvette Servo Questions

    Maybe I wasn't clear about which grooves I was talking about. I meant the grooves on the end of the pins (which the one from Amazon doesn't have any).

Forum statistics

Threads
132,425
Posts
1,867,922
Members
97,105
Latest member
Jellis02

Latest posts

Top