Search results

  1. Mickey_7106

    Brembo brakes

    dont know how i missed this picture. did you also do the rear? you up for compiling a list of what you boought? im really contemplating this upgrade. hoping i can run this set using my oem 22" escalade wheels
  2. Mickey_7106

    P0420 and p0430 after dod , performance parts and tune

    I believe no amount of tuning can fix those codes other than turning off the CEL for the front O2's. Since the 02 sensors are pushed back from their original location, they don't warm up fast enough in the short amount of time that's required. Think it's something like 30 seconds
  3. Mickey_7106

    P0420 and p0430 after dod , performance parts and tune

    That's a common code when you install long tubes, your tuner should have known that. On my C5 What i ended up having to do is swap the rear O2 sensors to the front. You're going to need some pigtail converters since the plugs won't match.
  4. Mickey_7106

    Exhaust tip recommendation / ideas / Pic request

    Hi Guys, Think ive narrowed down what exhaust im going to get. Based on a lot of youtube sound searches im going with a 2.5" or 3" Borla Atak crate muffler. Im wondering if i can do a dual out on these trucks. i see a lot of silverados like this but im not sure if its been done on an Suv...
  5. Mickey_7106

    Full "neon" escalade third brake light

    Amerilite is the seller on Amazon, no idea who makes it. This is the first lot they sent. I didn't take a pic of the second but did verify that they weren't the same.
  6. Mickey_7106

    Full "neon" escalade third brake light

    It was hard to capture a good pic of the warping look, but it was behind the second and third mounts screws. Screwing them down would pull it in giving it an un-even look. It was very minimal on the oem spoiler Both Amerilite spoilers. Im trying to point where it sinks in. Oem spoiler with...
  7. Mickey_7106

    Full "neon" escalade third brake light

    Installed the replacement and it was crap too. It looked like it was bubbled in the center and it was only a matter of time before it started to bump on the roof. Also some areas around the bar were looking a bit warped or distorted so I wasn't any happier with this new one . I ended up...
  8. Mickey_7106

    Brembo brakes

    Wondering if the master cylinder or brake booster need to be upgraded to get the full benefit of going with bigger calipers? Sure, they cover more surface area, but the "bite pressure" remains the same. Im probably over thinking this, but it seems to me that just swapping calipers reduces...
  9. Mickey_7106

    Full "neon" escalade third brake light

    Paint still there. Now that its cooler its no longer touching. They sent me a replacement yesterday
  10. Mickey_7106

    Full "neon" escalade third brake light

    The highest has been 85°. I used the stock bolts. When i unscrewed the 2 10mm nuts it looked like the spoiler relaxed a bit. I can open the glass and gate now, but slightly bothered thats its kissing the roof.
  11. Mickey_7106

    Full "neon" escalade third brake light

    Probably a week and I'm starting to have problems. It appears the plastic might have expanded under the sun and now it hits the roof of the truck trying to open it. I tried adjusting it as far down as i could which wasnt much and it can open all the way but it barely kisses the roof along the...
  12. Mickey_7106

    Full "neon" escalade third brake light

    Almost bought that one but i like the red bar going across and i wasn't sure how many lumens I'll loose going that route
  13. Mickey_7106

    Full "neon" escalade third brake light

    See first post
  14. Mickey_7106

    My yukon appearance mods

    I think adding a "yukon" to the top of the windshield will complete the look and leave no one wondering what you're driving
  15. Mickey_7106

    Full "neon" escalade third brake light

    Day time, overcast sky
  16. Mickey_7106

    Escalade/Esky Full LED 3rd Brake Light Conversion

    Here's some pics for this neon full bar https://www.tahoeyukonforum.com/threads/full-neon-escalade-third-brake-light.129352/
  17. Mickey_7106

    Full "neon" escalade third brake light

    Btw the night shot was rushed. I'll take a better one
  18. Mickey_7106

    Full "neon" escalade third brake light

    Bought this bar from amazon for about $210 Shipped. This is the look that i planned on achieving when i bought an oem esky light over a year ago. It's made in Taiwan and its a decent looking piece. It's painted "black" but from up close its a real dark gray. Cant really tell the difference from...
  19. Mickey_7106

    22x14 fuel Mavericks and 35s

    would like to see a side shot of the wheels and fenders to see how much clearance you have. looks good
  20. Mickey_7106

    Escalade/Esky Full LED 3rd Brake Light Conversion

    i bit the bullet and bought the red one. Should get it by the 13th.
  21. Mickey_7106

    Escalade/Esky Full LED 3rd Brake Light Conversion

    Amazon
  22. Mickey_7106

    Escalade/Esky Full LED 3rd Brake Light Conversion

    You can find them on Amazon and if you look at the customer reviews/pics they appear to be bright. I only screan shot ebay since i found both of those pretty easy. Plus they were about $20 more on amazon
  23. Mickey_7106

    Escalade/Esky Full LED 3rd Brake Light Conversion

    Looks like someone stole my idea! Lol who here has one? Not sure if i like how the smoked one looks
  24. Mickey_7106

    What did you do to your NNBS GMT900 Tahoe/Yukon Today?

    Thanks!
  25. Mickey_7106

    What did you do to your NNBS GMT900 Tahoe/Yukon Today?

    Not broken. Going to swap my fog lights for the ss3 max soon. But figured I didn't want these expensive lights hanging off by 12 year old plastic.

Forum statistics

Threads
132,723
Posts
1,873,196
Members
97,553
Latest member
AceDawg

Latest posts

Top