Search results

  1. D

    Creaky Rear brakes

    Play around with the emergency cable and see if the sound is similar
  2. D

    Would you buy it?

    If I was in search of a Tahoe size vehicle I would rather get the Toyota Sequoia. I haven't driven a Ford Expedition yet but that would be a consideration. I dont care for my 2018 Suburban suspension AT ALL
  3. D

    2017 Yukon will not lower

    like one past post mentioned with both spindles removes and put next to each other is the cv shaft hole offset from one another? If the answer is yes then you will get your drop. I don't understand if the holes are at different positions then how can you NOT get a drop. Now it is confirmed the...
  4. D

    2017 Yukon Denali - MRC- Rough Ride

    MRC on these vehicles are junk IMO and many others. Many people remove the MRC and go back to conventional suspension. Do a search
  5. D

    Tailgating with TV?

    only one way to find out.....try it. it should be fine
  6. D

    2017 Tahoe - Ticking Noise

    any noise from the engine bay?
  7. D

    Mag Ride Adjustments

    Okay, that is good to know adds this as an option then.
  8. D

    Mag Ride Adjustments

    So for people using AFM delete modules that connect to the OBD port I guess you would have to choose which mod to use at a single given time
  9. D

    Front tires rubbing Eibach swaybar

    yep, the joys of a lowered car. note to self dont turn he wheel to full left/right
  10. D

    Hellwig vs Hotchkis sway bars and how hard to install

    Sorry for the size and my text is not on top. I too have the rubbing issue and wanted to post the pics to help the thread question out since someone asked and no pics were producted.
  11. D

    Hellwig vs Hotchkis sway bars and how hard to install

    I am not trying to hijack this thread but only to add some pics to the topic of sway bar rubbing.
  12. D

    Belltech isn't performing

    I do believe my noise was from the Emergency brake cable. After securing the hell out of the cable I dont hear my noise anymore
  13. D

    Would you buy your Yukon/Tahoe again?

    I wouldn't say I wouldn't buy again till I drive the Expedition first. I am not 100% satisficed with my 2018 Premier but couldn't be 100% certain till I drive the other brand. I didn't want Ford first gen Expedition so I passed on looking at it but after some time in my suburban.......I wish I...
  14. D

    NORCAL SS Kit info/tech on how to level the rear of a 2015 up GM SUV

    Tony I noticed your website has the lowering kit supplied with Belltech 5305 coils. My kit came with 5301 coil. What would be the difference?
  15. D

    Belltech isn't performing

    What did we ignore? Your 2" drop suggestion?
  16. D

    Looking for Pics of rear window hatch latch

    I had my rear window busted out and replaced but when they replaced the window there seems to be some misalignment. Does anyone have pictures of a factory setup of the rear hatch latch parts.
  17. D

    Belltech isn't performing

    honestly the biggest amount of noise came from a bracket where two cables meet on frame rail near the driver side passenger door area. I think that might be were the main cable connects to the left/right cable that then go to each side of the axle. I will be investigating more when I get home...
  18. D

    Belltech isn't performing

    Roast me if you want but yesterday I added a 1" spacer to the McGaughy 30052 springs and shortened the rods as small as I could with the rods I have. The overall height from lower rim to fender was 32.5" (think that's my desired height), drove it around and noise was horrible again. I could...
  19. D

    Belltech isn't performing

    I adjusted sensor rods and added easily 5/8" height and the ride was stiffer (as expected) but the sound was worse, I just dont understand where I can find the sweet spot of adjustments. I guess any suggestions on to try McGaughy 33062 or Max Trac 201630
  20. D

    FS: Belltech and McGaughy Lowering Springs

    I have a pair of: -Belltech 5323 springs used for about 2.5kmiles -Belltech 5301 springs used for about 5k miles (springs came from NORCAL's kit he sells) -McGaughy 33052 springs. (unknown miles but previous owner said he used for a couple hundred miles and I have only had them for about 200...
  21. D

    Belltech isn't performing

    I will play with the sensor rods tonight but I noticed that McGaughy website recommends the 33062 spring labeled "heavy duty/air shocks" and I currently am running the 33052 labeled "Light duty factory rear shocks" which could be the difference in spring rate that might aid in my shocks not...
  22. D

    Belltech isn't performing

    I will be playing with the rods hopefully today and get the height right and hope the extra firmness follows. Before installing these spring I did out the stock springs back in and the noise was not present which now made me think that the auto leveling shocks don't like the rapid movement with...
  23. D

    Belltech isn't performing

    -I cannot hear the noise in the cabin while the windows are up -I do have the upper/lower isolators in place, I will double check the upper isolators are in proper place -I think it sits damn near level with the Beltech spindle drops up front. I dont hear my compressors kick in when I start the...
  24. D

    NBS Crown Suspension 2" Drop Coil

    sorry not sure this will for my 2018, model # are a little different
  25. D

    Belltech isn't performing

    Okay, So I tried a different spring and I still hear some noises but its a fraction of what I heard before. Question: Would the Auto leveling shocks be the cause of the noise if the springs were softer then the shocks were made for. It sounds is like air fluttering (soft hissing) when the axle...

Forum statistics

Threads
132,728
Posts
1,873,270
Members
97,558
Latest member
BurbyRST

Latest posts

Top