The biggest issue was the first turn was so tight on the 5323 spring the OD of the hose prevented it from feeding and passing the first coil insertion.
Not sure exactly what house you are referring to
Yep. Horrible height but quite ride. I guess I have some Beltech equipment I will be putting in the classified section. Not sure why no other vehicle had the same issue as I did but....
After going back to stock I'm convinced the noise was the springs flexing. I wish I could have tried non air...
Sad to say I went back to stock till I can find another spring to try. The nose was to embarrassing for me to ride in. I'm now shocked on the stock height but I guess it's better than the noise for now
Hopefully you can listen past the wind noise on the mic and listen to the background sound of the suspension I'm rolling 5- 10 mph in a parking garage. Towards the end you can hear it better. Sounds like a couple screwing on an old bed
tony your email address seems to be down but I have a question.
Does Beltech offer a non-progressive spring design for a 2018 Suburban? Not sure I am liking the progressive design. I am running out of ideas on how to correct my noise issue and everyone loves Beltech but I might have to try...
I think the 3" drop is plenty for me or possibly i like the 2-3" range. I have the Beltech 5323 springs and a 1" spacer on it and have my rods sets to around 2 5/8" length which is yielding me about 36" from ground to fender ( I know its not the best way to measure). I could go 1/4-1/2" taller...
What is this chattering you are mentioning. I am fighting a battle with a sound that is coming from my rear end with Beltech 5323 springs and 1" spacer. Ride is excellent but the sound is horrible. The sound makes me feel like people who hear think I have a broken car or cheap setup and is...
I can easily hear it driving with the windows down. I cannot hear it with the windows up. I will have to try to capture another video in a different area. I just rolled through the neighborhood looking for a quick spot to record.
I put the 5323 springs on with the 1" space and the original lower rubber boot and it feels great to me. Minimal noise but still there. I just feel people can hear it and it makes me feel cheap or like the vehicle is broken
Yeah want the best. It's there but hard to separate the nature noise of a vehicle going over a bump and the extra noise associated with it also. The initial noise is nature then I hear a secondary noise that repeats itself a couple tim s before subsiding.
h
Here is a link to the video, only need to watch the first 30sec. My daughter recorded too much.
The video freezes for a second but the audio runs smooth. Crickets in the background are loud, sorry.
Want to listen for the chattering that follows the nature sound of a vehicle going over bumps
I will try and get an updated video and pictures of the current setup. I am currently running the 5323 springs without a spacer, suspension rod is set to 3 1/8" from center of connection cup to cup. Right feels good to me, makes funny noises when going over railroad tracks and large humps like...
Yes, the only thing he was suggesting was the heat hose trick which helped reduce some of the noise. I could have used more to wrap more coils of the original Belltech spring but overall I felt the original Belltech spring was too soft for my liking and unfortionitly I could not wrap the second...
After much searching I have decided to ditch the Belltech and try something different.
It seems I have a "chattering" sound coming from my rear end when it hits bumps of certain sizes, bumps that I go over i the neighborhood so there are not serious bumps. I can hear the chattering and feel the...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.