I did a quick search and didnt find these specific tires so I wanted to ask if anyone used these tires. I live in southern Ohio and will be using them with minimal snow conditions, I tow rarely but will tow about 1500 miles annually with 5500# load.
I am presented with a decent deal on these...
I test drove a used vehicle once and it smelled like smoke. I pulled the cabin filter and it looked like that. Sales person asked me my thoughts and I mentioned the smell and he said he would look into it.... I stopped him and told him I pulled the cabin filter out and put in in the passenger...
Just an update, I added new tips and removed the resonator. LOVE IT more than before. I was in fear the removal of resonator was going to increase the overall db and it was going to be too much but in fact the db increase was very minimal but the throaty tone increase to a meaner tone and in...
I do have the Bose setup. As time goes on I find myself wanting a little more separation from mids/highs to keep up with my after market sub. Its only a matter of time that the stock speakers will keep me satisfied and I always upgrade. I usually get after market amps to support the after market...
I did a search and all I saw was people talking about wanting to replace interior speakers but havent found post of people executing this action.
Replacement isnt the question......its that I'm pretty sure stock speakers are 2ohm speakers and finding 2ohm speakers are a little more rare than...
Something to consider. I found it very obvious in the ride quality for the front suspension. A lot more bounce and doesn't feel as stiff when you hit bumps and pot holes. Just used a M6-50mm bolt and 1" nylon spacer.
Only down side I found was the tone is very low, nice but at certain speeds the lower tone may cause some droning but very small and very small RPM/speed range so.... but ALSO I cannot get my dual tip exhaust tip in the position I want due to the resonator in the stock location.
I am about to...
I might just try to create spacers for the amount of hassle for an end cap. If I can find some used parts I would try to pop the ends off but I dont want to accidentally break my stock set and find myself in a problem so....I will continue for some used parts and try later.
I am mainly looking for the end caps. Do you have dorman part number? I found some corvette rods that look to have the same end caps that I might try.
I thought they screw off but I was wrong, I dont want to try too hard and brake mine
Well, some videos have people unscrewing the ends off and using a 10/32" screw (not 100% on screw size off memory) but I looked at mine and it seems they are maybe molded on or something but they dont unscrew so before I damage mine I though I would look for some spare ones to mess with.
Looking for just the sensor rod that attaches for the ride height for front and rear suspension.
GM part 23155298, 23152099,23152100,23152101
Just the rod not the sensor by it self. Anyone know if salvage yard with these types of vehicles or anyone delete their MRS setup and these left over...
I just added the magnaflow 12259 to my 2018 Suburban 5.3. Left the flapper on and resonator. Sounds is just right for me. Slight increase in db and lower rumble. No with that being said, I think there is a drone/pressure pounding around 55mps, then goes away. Highway speeds of 70-80 the sound is...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.