Search results

  1. J

    HVAC refurb - PAG oil for each component

    I edited it to include that picture after I found it. I had originally created this there because I had no luck searching beforehand
  2. J

    HVAC refurb - PAG oil for each component

    Edit: I found a chart with each component amounts. Photo attached for anyone that searches for similar replacement. I'm in the middle of refreshing my AC (front and rear AC) - New seals all around, accumulator, orifice tube, expansion valve, etc... and found the capacities to be 40 oz r-134a...
  3. J

    Escalade Platinum cupholders - Heated/Cooled LED colors

    No it works properly. It cycles when I push the button. Just doesn't always light up the same way. Why would there even be a white LED?
  4. J

    Escalade Platinum cupholders - Heated/Cooled LED colors

    What's the trick with the platinum heated/cooled cupholders? It's a factory platinum, so not a retrofit, but the indicator/mode buttons change colors. Sometimes it'll be blue where the snowflake icon is, when it's cooling and will cycle to red where the wavy icon is for heating, then pressing...
  5. J

    Driver Side Lumbar Support Replacement Writeup - 2007 Escalade

    Would anyone happen to know the part number for a 2012 Escalade. I punched in the number from the OP and it said it did not fit my truck. Searching for the same part name yielded no results either for my truck
  6. J

    What did you do to your NNBS GMT900 Tahoe/Yukon Today?

    It's great, it's silicone grease, just sticky as hell
  7. J

    07 Escalade 6L80 into 12 Escalade - swapping 2012 valve body/TCM into the 2007 6L80

    Update. Zero issues, been driving it for a week. Knock on wood this lasts till I get the original rebuilt. Thanks everyone
  8. J

    '08 Tahoe 4x4 Motor Mount Education

    Have a writeup for this?
  9. J

    Interior Lights - Fuse 17

    Bump. Anyone have the MBEC pinouts or can take a picture for me? And/or where the ground location is for the dome light harness
  10. J

    07 Escalade 6L80 into 12 Escalade - swapping 2012 valve body/TCM into the 2007 6L80

    Ok that's what the Facebook responses were saying, but they didn't mention the sensors or anything. The speed sensors are both pieces with wires? So take those from the 2007 valve body and put them on the 2012 valve body. Then put the 2012 valve body with 07 sensors into the 07 transmission? I...
  11. J

    07 Escalade 6L80 into 12 Escalade - swapping 2012 valve body/TCM into the 2007 6L80

    I just read up on it, as of 2021 you can't use the tech2 to program anymore. GM discontinued it from their online options. I posted on a couple Facebook groups to see if anyone could help me locally, and a few people mentioned the 2007 with 2007 TEHCM won't work in a 2012. I haven't found...
  12. J

    07 Escalade 6L80 into 12 Escalade - swapping 2012 valve body/TCM into the 2007 6L80

    Will the truck drive at all, in limp mode or something, without completely porking it? Cheaper to just go to the dealer, which is only like 1.5 miles away.
  13. J

    07 Escalade 6L80 into 12 Escalade - swapping 2012 valve body/TCM into the 2007 6L80

    Any recommendations for a budget friendly j2534 interface tool? I see some for like under $100 up to $2k+...
  14. J

    07 Escalade 6L80 into 12 Escalade - swapping 2012 valve body/TCM into the 2007 6L80

    Ok I'm not familiar with tis2web. I have a tech 2 so the adapts should be alright. I'll have to figure it out.
  15. J

    07 Escalade 6L80 into 12 Escalade - swapping 2012 valve body/TCM into the 2007 6L80

    The title is accurate. But the actual vehicle the 2007 transmission comes from has in all likelihood been crushed already. I do have the 2007 valve body, TEHCM, IMS, & speed sensor.
  16. J

    07 Escalade 6L80 into 12 Escalade - swapping 2012 valve body/TCM into the 2007 6L80

    The 2007 vehicle no longer exists. I took the transmission (including the valve body/TEHCM and the converter). That valve body/TEHCM is sitting on my bench, with the speed sensor/harness, etc, completely intact aside from the 6 bolts attaching it to the case. I don't really have time to wait...
  17. J

    07 Escalade 6L80 into 12 Escalade - swapping 2012 valve body/TCM into the 2007 6L80

    Off white thing with green plug housing in the first photo, opposite side of valve body in the 2nd.
  18. J

    07 Escalade 6L80 into 12 Escalade - swapping 2012 valve body/TCM into the 2007 6L80

    Which is the speed sensor? The off white piece that plugs into the green housing, or the one on the other side?
  19. J

    07 Escalade 6L80 into 12 Escalade - swapping 2012 valve body/TCM into the 2007 6L80

    So I just need to take that module that plugs into the green connector from the 07 and install it on the 2012 valve body?
  20. J

    07 Escalade 6L80 into 12 Escalade - swapping 2012 valve body/TCM into the 2007 6L80

    I'm not using another TEHCM. I'm using the one that has always been installed. It's just going into a different transmission
  21. J

    07 Escalade 6L80 into 12 Escalade - swapping 2012 valve body/TCM into the 2007 6L80

    I do not, I can reach out to guy who was parting out the 07, but it's likely been out of his yard for weeks if not months at this point. I bought this transmission for my previous 2011 Escalade as the trans was slipping in that but the engine gave up (309k miles) before the transmission actually...
  22. J

    07 Escalade 6L80 into 12 Escalade - swapping 2012 valve body/TCM into the 2007 6L80

    That's my line of thinking. We'll see what happens in a couple hours
  23. J

    07 Escalade 6L80 into 12 Escalade - swapping 2012 valve body/TCM into the 2007 6L80

    I'm retaining the tehcm and valve body from the junk transmission - after thorough disassembly and cleaning and residual metal particles from it.
  24. J

    07 Escalade 6L80 into 12 Escalade - swapping 2012 valve body/TCM into the 2007 6L80

    My 2012 Escalade transmission is toast. I have a low(er) mileage 2007 Escalade 6L80 that I just finished putting in the truck. If I take the 2012 Valve Body & TEHCM and swap it into the 2007 transmission will I need to reprogram/flash/tune it? I have both valve bodies/tehcm on my workbench and...
  25. J

    Electrical Issues - Speedo, Traction Control, Stabilitrack, DIC Flashing

    I replaced the battery ground and the ground braid at the firewall so far. The positive cables are next

Forum statistics

Threads
133,417
Posts
1,885,157
Members
98,545
Latest member
Tenn2033

Latest posts

Top