Search results

  1. JPVortex

    05 Tahoe EBCM

    Very well could be corrosion etc. I did clear the DTCs, comes right back as soon as I hit 4-5mph. I think testing the motor with an advanced obd2 reader would tell me if it's running or not? I had an obd2 reader but accidently junked it with my old project s10 lol. So now I have to go to...
  2. JPVortex

    05 Tahoe EBCM

    I have a friend that possibly has an obd2 reader that can run the pump, so then I can test it
  3. JPVortex

    05 Tahoe EBCM

    Used EBCM has been installed, one nightmare of a code remains. C0268 - Pump motor short circuited. I'm guessing at this point the pump is also bad.
  4. JPVortex

    05 Tahoe EBCM

    Heres the part I ordered! They seem to look just about the same except for the top sticker which I noticed afterwards, hopefully internally they're identical. here they are side by side
  5. JPVortex

    No oil pressure '04 Yukon

    Yeah I'd hook a manual gauge before you freak out anymore. Doing it with the intake on is very simple. Was able to do it with my fat fingers. The hardest part by far is getting the hose for the manual gauge on which required lots of choice words. Get a 1 1/16in oil pressure sending unit...
  6. JPVortex

    05 Tahoe EBCM

    Got the EBCM off with a combination of sawzall, cutoff wheel and a dremel tool. Things totally mangled lol. No damage whatsoever to the pump at all. Studs still need taken off but dont think that'll be too much of a pain. The part number on it is totally faded, but it's an 11-2-2 model, so its...
  7. JPVortex

    05 Tahoe line Lock

    I think the truck not doing a burnout may have to do with the fact that my throttle body is drive by wire and not cable. Watching Neutral Drop they've beaten on some Tahoe's(way more than I ever would) and were able to do burnouts. They all seem like older ones to me with a drive by cable. So...
  8. JPVortex

    05 Tahoe line Lock

    Yeah makes sense. Really would not like having to swap the 4l60e AGAIN. lol, I may not do the line lock it was simply something I was interested in inquiring about.
  9. JPVortex

    05 Tahoe line Lock

    ah, so what you're saying is the line lock may not be strong enough to prevent the front tires from spinning when I want them to be locked?
  10. JPVortex

    05 Tahoe line Lock

    I dont have any sort of traction control with a button, I do have a stability control with a fuse though.
  11. JPVortex

    05 Tahoe line Lock

    Not trying to spin the fronts though, trying to spin the rears.
  12. JPVortex

    05 Tahoe line Lock

    So front install it is?
  13. JPVortex

    05 Tahoe line Lock

    It wont do it right now unless I'm in like wet gravel. Wont let me rev past 2k and the tires just skid instead of full spinning.
  14. JPVortex

    05 Tahoe line Lock

    Totally agree, it's a question, boy I'm getting shamed for it lol
  15. JPVortex

    05 Tahoe line Lock

    I have a totally clean driving record as of now lmao. Not one speeding ticket.
  16. JPVortex

    05 Tahoe line Lock

    I would never ruin my good new tires, I have a friend who may have a ***** set he can sell me cheap. As for why, idk to be quite honest lol, it truly is an American thing lol, I just want to be able to do burnouts
  17. JPVortex

    05 Tahoe line Lock

    After more reading definitely front.
  18. JPVortex

    05 Tahoe line Lock

    Ok thank you, but wouldnt front or rear work? For front you press brake and lock and for rear you lock then press the brakes when doing the burnout? do you think I should mount at the MC or after the abs pump?
  19. JPVortex

    05 Tahoe line Lock

    Hi y'all Im considering installing a line lock on my tahoe to do some burnouts with a ***** pair of tires. Couple of questions: Would it be easier to install it to the front or rear? Im okay with either setup as it kind of ends up doing the same thing for me either way. Do I need to install it...
  20. JPVortex

    05 Tahoe EBCM

    well that's being brutally honest no shame from here though lol!
  21. JPVortex

    05 Tahoe EBCM

    I feel like glue or epoxy like jb weld would just break right off tbh.
  22. JPVortex

    05 Tahoe EBCM

    I wonder if disconnecting 3 three bracket to frame bolts will allow more play to move it a bit. I'd like to be able to return this one for a core, which some private companies will take for like $10 off.
  23. JPVortex

    05 Tahoe EBCM

    So pretty much making room for the extractor to get the 4 torx out? did you cut it in half so 1/2 of it fell off? And its a horizontal cut across im guessing?
  24. JPVortex

    05 Tahoe EBCM

    I dont think mine was even a T25 though, it may have been a T20 iirc.
  25. JPVortex

    05 Tahoe EBCM

    I'd be interested to hear about how to saw it off though without damaging it lol. I'm also going to try removing the mounting bracket bolts and seeing if I can fit one of those extractor bits in there. They always seem to break on me though when trying to use them. May also use a dremel with a...

Forum statistics

Threads
133,421
Posts
1,885,270
Members
98,555
Latest member
z33garage

Latest posts

Top