Search results

  1. richs1

    Fog lights

    I know this may be a strange question, but the world is a strange place, so thought I would give it a try. I have a new to me 2011 z71 Tahoe and I really don’t like the rectangle/square fog lights. Anyone know of a kit made that you can change them out and put round lights in that space...
  2. richs1

    2 inch leveling kit

    Thank you!
  3. richs1

    2 inch leveling kit

    What was the width of the tires? I am wanting to run 33’s but haven’t found anyone doing that was just a level. I don’t want to trim and don’t want to rub. I appreciate your response!
  4. richs1

    2 inch leveling kit

    Thanks, I think you are correct, I used those on a 2012 Sierra and had trim the studs. Appreciate your reply.
  5. richs1

    2 inch leveling kit

    I just sold my 2004 Z71 Tahoe and picked up a 2011 Z71 Tahoe. World of difference in the two vehicles. I am wanting to level the truck and based on loose measurements from ground to center of fender is 47.25 in the rear and 45.25 in the front. I have read every post I can find on here and...
  6. richs1

    3.5 Lift on my Z71

    what size tires are you running? I am picking up a 2011 z71 Tahoe Tuesday and I want to lift it a little and run some bigger nitto ridge grapplers. I just sold an 04 Z71 Tahoe with a leveling kit on it and I was running 33x11.50-20’s on it. I don’t want to sacrifice ride quality. Appreciate...
  7. richs1

    2004 Yukon Denali partout

    It’s the wood grain trim that goes around the cup holder and the storage and CD player. I know your selling the cup holder, but wasn’t sure if the trim was gone or you had just removed it to get a pic of the cup holders
  8. richs1

    2004 Yukon Denali partout

    gotcha. Do you have the trim for the console? It’s not in the pics, is it available?
  9. richs1

    2004 Yukon Denali partout

    Any luck on the dash bezel, console, and door switch covers?
  10. richs1

    2004 Yukon Denali partout

    No problem, completely understand. Appreciate it!
  11. richs1

    2004 Yukon Denali partout

    Should I assume none of the parts I asked about are available?
  12. richs1

    2004 Yukon Denali partout

    I would also be interested in the full console, but it may cost too much to ship.
  13. richs1

    2004 Yukon Denali partout

    I am looking for the dash bezel, and switch covers on doors. Looking for dark(almost black) wood grain. If they are in good shape, let me know price.. you can call or text me at 662-394-3040
  14. richs1

    2004 Yukon Denali partout

    What color is the interior?
  15. richs1

    Tire and rim size for a 3 inch lift

    I have an 04 Z71, I have aftermarket keys and spacers under the rear, got about 3 inches over stock. I am running 33x11.50-20 nitro ridge grapplers. No issues in the front, severe articulation in the rear will cause rear tire to make contact with inner fender at the shock mount. I’m at about...
  16. richs1

    Bilstien Shocks to go with Leveling Kit

    I used the 5100’s 0-2 inch lift.
  17. richs1

    Adjustable rear control arms....Help

    I have no clue on the adjustable control arms. It would seem to me that unless you are lifting it to the point that you have a extreme angle on the driveshaft, they wouldn’t be needed. I assume(again) that the adjustable arms will change the angel of the rear end. I would like to know where...
  18. richs1

    Softer ride

    Bilstein 5100 is what I used on mine. I do have aftermarket keys and rear spacers, so mine is a little stiff at low speed. On the highway it rides great.
  19. richs1

    Suspension recommendation

    1. You get zero lift from shocks, if you get taller springs you can get some lift. Amount of lift will depend on springs you buy. Z71 springs are already taller than regular tahoe. Just add spacers to rear. 2. Yes 3. Unfamiliar with rough country, but any lift less than 3 inches is going to...
  20. richs1

    Tire decision

    I have the nitto ridge grapplers. They are great off road and very quiet on the highway. I’ve got probably 20,000 on them with almost no wear. Very aggressive looking tire.
  21. richs1

    Leveling & Tire Question

    I have an 04 Z71, I installed aftermarket keys and 1.5 inch spacers in the rear. Started with Nitto ridge grapplers 295/55-20 which are 32.76 tall and 12.17 wide. They rubbed on heavy articulation in the rear. Cracked the inner fender around the top shock mount. I am running repo wheels that...
  22. richs1

    couple of questions

    Mine is an 04, had the stock springs with 197000 miles on them. Mine had not compressed at all. I was stock ride height in the rear before any modifications. Stock Z71 is about 37.5. Your adding longer springs and another inch taller than my 1.5. Your gonna need a spring compressor. I’m...
  23. richs1

    couple of questions

  24. richs1

    couple of questions

    Need to make a correction, I only added 1.5 inch spacers in the rear....2.5 is going to be difficult to install with stock springs...
  25. richs1

    couple of questions

    Did you buy oversized springs? I have a Z71, they have larger springs than a regular tahoe, and I used 2 inch spacers. It was hard to get them in, but I eventually got them in. With 3 inch keys, and 2 inch spacers, I’m a little over 39 inches at all four wheel wells. If your new springs are...

Forum statistics

Threads
133,755
Posts
1,890,504
Members
99,025
Latest member
mecanico448

Latest posts

Top