Search results

  1. L

    hooking up trailer acc wire to second battery by relocating orginal fuse

    Once again thanks everyone
  2. L

    hooking up trailer acc wire to second battery by relocating orginal fuse

    Cool thanks you think a 10 awg wire will be enough if i run a 30 amp use
  3. L

    rewiring a factory fuse to run off second battery

    The batt is charged by the stock alt but there is a battery isolater on it so when the car is off the the two batts are seperate. You think i need a 8awg wire you dont think a 10 awg wire is good enough
  4. L

    rewiring a factory fuse to run off second battery

    I think where on the same page you just did a better job explaning it. Basically take the quick disconnect connector and connect it to that pin run to bat and done. Also you think 10 awg wire would be enough and just use a 30 amp fuse.
  5. L

    hooking up trailer acc wire to second battery by relocating orginal fuse

    Hey the second battery is powered byt the main alternator and a batt isolator hooked up to the second battery so when the car is not on the bateries are seperated. The reason I want to do this is. I took a 7 pin male tralier plug wired it so it has a pos neg wire coming out of it. My plan is...
  6. L

    3.5 speakers in the rear

    yea man good luck and def post pics would like to see how urs turns out.
  7. L

    hooking up trailer acc wire to second battery by relocating orginal fuse

    Hey Everyone, So I installed a second battery in my car and have quick question. I want to hook up the rear trailer acc power wire to the second battery in stead of having it run off first factory battery. The 2001 tahoe has a seprate fuse for this wire that is a 40 amp fuse. I was curious if I...
  8. L

    3.5 speakers in the rear

    Nope did not have to cut any metal pillars. There is a pretty decent size whole behind the plastic pillar that was big enough alomst fit the hole speaker i could of probably cut the metal and enlarged the diameter of the hole by an inch and get the speaker completly in but i was not to keen on...
  9. L

    3.5 speakers in the rear

    You are right sir I checked again and I have 4in speakerS. I finally got a chance to take some pics of how it looks.
  10. L

    3.5 speakers in the rear

    I used some mephis audio speakers laying around and pretty much all speakers comes with the grill. Here is the process i did to get it to work. I just basically measured the diamater of the speaker mounting diamater of the 3.5 speaker and then made a template and placed it over the orginal...
  11. L

    3.5 speakers in the rear

    I also just want to clarify that the speaker sits ontop of the plastic pillar not behind it. There is not enough room behing the plastuc trim to mount a seaker of that size.
  12. L

    rewiring a factory fuse to run off second battery

    Hey Everyone, So I installed a second battery in my car and have quick question. I want to hook up the rear trailer acc power wire to the second battery in stead of having it run off first factory one. The 2001 tahoe has a seprate fuse for this wire that is a 40 amp fuse. I was curious if I...
  13. L

    3.5 speakers in the rear

    I installed two 3.5 inspeakers in those pillars for the third row people. PLus I had the speakers laying around. I think it looks good and most people think it stock. I did end up cutting into the pillars as one of the previous poster mentioned. When I get a chance Ill take photos of the...
  14. L

    Rhino or Ranch Hand Grill Guard

    here the gorihno 3000. The iron cross bumper is bad ass i saw it on a tahoe and liked it but i was not ready to spend 1200 for it and add all that extra weight to the front. Got this for like 220
  15. L

    Rhino or Ranch Hand Grill Guard

    got the gorhino 3000 push bar and like it alot. It is def well made.
  16. L

    Rust\rot under and around Tahoe?

    http://www.tahoeyukonforum.com/forum/showthread.php?t=74403
  17. L

    Undercarige Rust

    I have thinking or por 15 or rustbullet. I know sub you mention that it might not be the best but i took a second look at my frame and pretty much all the NOX RUST X-121-B that gm put on is for the most part gone so i was thinking of going crazy and scrap the rest off and por 15 or rust bullet...
  18. L

    Undercarige Rust

    Hey thanks for all the awesome info. I just want to make clear what the proccess is. So i was was going to get 80 grit sponge sand paper and just sand off as much rust as i can and then spray the spot with phosphoric acid after 4 hours spray with water baking soda then whip off with a towel...
  19. L

    iPad in yukon?

    Yea if you go that route you can pretty much get any size screen if your not trying to put it where the radio goes and then u can either make sure the screens u get had a video out put and that will connect to the headrest. It can also go the route of building a carpc to
  20. L

    iPad in yukon?

    For the most part 1 - Custom gadz module 2 - LCD screen 3 - enclousure 4 - Video output for phone 1 - So you need customgadz controller (which controls your phone through bluetooth) Let them know what screen you ended up getting before buying 2 -Screen you can actually use an after market 7...
  21. L

    iPad in yukon?

    I can try to take some pic this weekend and do a write up with the parts and all.
  22. L

    iPad in yukon?

    Hey Kinda some what off topic but not. I wanted to do the same thing but decided not to put a dedicated ipad in the car so I purchased this. http://www.customgadz.com/downloads/ Basically installed this to a 7 inch touch screen from ebay and now I can mirror my phone to it wirellesly and...
  23. L

    window issues

    If the the scissors are working meaning the motor is going up and down that means you have a snapped cable or a broken plastic piece that holds the cable in place. So this allows your motor to move up and down while window stays in place. If the cable is fine then that motor should not go up...
  24. L

    UPDATE on 8" Shallow Mount Subwoofer drivers to fit in 01-02 OEM box

    I did alot of research and was looking for a go sub that was not expensive hit hard and fit sub box and went with this sub. Pioneer TS-SW2002D2 8-inch. I had to modify the box a little by sanding down the front but in the end glad i did the sub sounds nice in the box and I didnt have to cut...
  25. L

    Undercarige Rust

    Hey Everyone been reading up on things I can do to prep the under side of my car to prolong its life from rust. I was curious to what suggestion you guys might have to help ( products procedures). Thanks everyone in advance.

Forum statistics

Threads
133,757
Posts
1,890,536
Members
99,030
Latest member
super_kev

Latest posts

Top