So I subscribed to all data to get the schematic and further investigated this. I checked the 10amp crank fuse under the hood which should have 12v at it at all times per the schematic (hot at all times) and I have no voltage there. I the repacked the ignition switch since this is where it gets...
Yeah, not ideal but the truck has 350k on it and it’s a back up vehicle so I got lower mileage transmission from a junk yard and the school said they would put it in. When it starts it runs great but that’s not real frequent. I really wish I had a starter circuit schematic so I could just...
Latest wrinkle in this weirdness. Jacked it up and looked at the starter and to see if there are any obvious things wrong. The heat shield in the tarter looks like it had arced off on the starter hot wire. Moved the heat shield up and over a little and got out and it started first try. I...
The trans shop was the high school where my wife works so there is no telling what all they did. They somehow damaged the starter solenoid and the teacher replaced it with a “known working compatible” part.
Would the neutral safety switch being out of position cause it to still not start in neutral? The weird thing is it will occasionally start and runs fine, then you shut it off and it won’t restart. Is there a ground on the transmission that maybe they did not it reattach and would it...
Just got home and it will not start in neutral. Also in the on position the gauge display is not on nor are any of the dash warning lights. I can't remember if they are supposed go be on in the on position.
All fuses check out as good and the starter relay is at least clicking. I am going to rug something to check to see if that relay is sending power out. Does anybody have a starter circuit waiting diagram or could what color and where the neutral saftey switch is?
We recently had the transmission replaced in our 2003 GMC Yukon Denali Xl. Ever since we got it back it has had some strange starting issues. Initially thought it was the starter, replaced with a new unit and replaced the battery due to multiple complete discharges. When you turn they key the...
Does anybody have a wiring diagram for teh driver's side door or master window switch? THis would be for a 2003 Yukon Denali XL. I have lost all function in the door and I am trying to track down the problem.
Tne harness in the drivers door. Mainly looking for the plugs going into the window switch with about 6": of wiore attahced or just the entire harness cut as it comes into the door.
Over the weekend I changed the fan clutch, and plugs and wires. While i was putting the engine covers back on one of the heater hose connectors broke. Those connectors can suck it. I ended up replacing all of them since I assume if one broke the others were not far behind. Those have the be...
Any chance you are going back to said junk yard? I also need the springs from the center console lid, they keep it open. I have none here in Knoxville to loot. May be work out a deal to get the springs and a couple blanks?
Radio in lower bezel.
1st pic was attempt one to gain use of a USB port and using an adapter. The radio crapped out and the adapter was not the ideal solution.
Pic two is what it looks like now. Factory radio on works for navigation and the double din handles all audio duties. The factory...
I picked up the heated/cooled cup holders off eBay from a platinum Esky. Disassembled them and swapped doors with my Denali parts and the. Wired them in tonight.
That is a double din in the lower dash. I retained the factory navigation and just modified the lower bezel(two lower bezels for...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.