Search results

  1. Dantheman1540

    9.5SF Swap

    That’s a sleeper right there! Let’s hope it’s just traction you’re breaking. For a little while atleast :cheers:
  2. Dantheman1540

    9.5SF Swap

    Nice job! Good thought on that drive shaft swap.
  3. Dantheman1540

    Free to me 1996 GMC

    Axle is all welded up, I was originally going to wait until it had been rebuilt and actually weld everything once it was mocked up in the truck. But instead I just took a crap ton of measurements and used my digital angle finder a lot. I think it will work out. Also maybe one of y’all know...
  4. Dantheman1540

    Free to me 1996 GMC

    I agree toilet bowl injection is best injection You’re saying you like the big drum but not the little half ton drums? No one specific and I get their reasoning drums can work well. Just not worth the hassle, and if I didn’t already have everything to swap them out I’d probably just have a...
  5. Dantheman1540

    Free to me 1996 GMC

    I’m starting to get heckled on the GMT40 forum for swapping out my drum brake axle for the H2 with disks and a locker. I didn’t realize how drum brakes had supporters this day and age.
  6. Dantheman1540

    Free to me 1996 GMC

    Florida is wild when it comes to the registration and titling of vehicles. I walked into a DMV with my aunt who just became the executor of the will. Within 10 minutes we walked out and the truck was titled and registered to me. No mention of it being totaled or needing an inspection. Woot...
  7. Dantheman1540

    2004 6.0 NV4500 Tahoe

    Passenger front door done as well. Doubt I’ll notice much difference but atleast the sun won’t beam through the mesh just right and illuminate the tweeter falling out anymore.
  8. Dantheman1540

    2004 6.0 NV4500 Tahoe

    Tis the reason I did the audio in everything since myself
  9. Dantheman1540

    2004 6.0 NV4500 Tahoe

    Ordered new door markers for this and decided I needed to pull the door panel off to resecure the tweeter that had called out of its mount long ago. Upon removing the door panel I realized this must be the first time I’ve ever removed it, at least since I had the audio done in 2019. I know this...
  10. Dantheman1540

    2004 6.0 NV4500 Tahoe

    Tahoe made it to work and back so I’m calling the ECT issue mended. I think my next thing to do on it is fix the exhaust. The QTP cutout quit working so I need to diagnose that (prob another burnt up motor from holding the switch to long). If it’s bad I’ll probably just redo the whole damn thing...
  11. Dantheman1540

    2004 6.0 NV4500 Tahoe

    Those Deaver 64” springs in the rear do the lords work well! The hydro bumps were working well along side them as well. The front is no slouch either, but the front has a lot more down travel than up and doesn’t look as obvious in pics. Iirc I measured 14”front and 17” rear. But I think the rear...
  12. Dantheman1540

    2004 6.0 NV4500 Tahoe

    Pretty sure I fixed it, the pintail had been sliced previously and it looked like the splice had failed. All fixed and survived a run to the only store in town, the one and only MOPHOin Dollar General. Where I picked up some washing chemicals and gave this sloot a scrubbing. Also gave my...
  13. Dantheman1540

    2004 6.0 NV4500 Tahoe

    Well my wiring replacement didn’t fix my issue. Tahoe almost left me stranded after it stalled and wouldn’t start twice on my ride home. I think I found a splice in the ECT sensor harness wiring that could be bad. I ended up wiggling it after it wouldn’t start and it made it home after that. So...
  14. Dantheman1540

    2004 6.0 NV4500 Tahoe

    I’d prefer you come trim around my piece :p
  15. Dantheman1540

    2004 6.0 NV4500 Tahoe

    Actually spent 30mins looking for this trim piece. I almost thought I threw it out on accident. Eventually I found it under the back seat of the Tahoe luckily not crushed.
  16. Dantheman1540

    2004 6.0 NV4500 Tahoe

    Shifter dohicky removed, now I gotta remember where I stashed the manual trim piece.
  17. Dantheman1540

    2004 6.0 NV4500 Tahoe

    Feels good to be working on this again and fine tuning some stuff that had really really really aggravated me for a long time lol.
  18. Dantheman1540

    2004 6.0 NV4500 Tahoe

    Ok it’s not bad at all, once the column trim is removed it’s just two T25s and 4 connectors which are easy to get to. The lower T25 is kinda a pain in the butt, your probably supposed to remove the steering wheel, but that’s a lot of work and I made it work with a T25bit in a 1/4” wrench. Taping...
  19. Dantheman1540

    2004 6.0 NV4500 Tahoe

    When your snipped, raw dog is life.
  20. Dantheman1540

    2004 6.0 NV4500 Tahoe

    I think I’ll attempt it in the morning, I’ll pull the one out of my RCSB
  21. Dantheman1540

    Free to me 1996 GMC

    Went down and cleaned my shop up a bit before work and drove the dirt road way in the gmc. I’ve got close to 30miles on it so far with no issues, I think that warrants getting a spare set of keys made. Anyway decided I’d see how bad this 4l80 first gear is and it impressed me! 1st gear and...
  22. Dantheman1540

    Free to me 1996 GMC

    I was actually looking for what plate I should get not the verbiage because the trucks kinda too stock imo for a custom name plate. But I might do like save the cougars or something plate. There’s so many options in fl it crazy.
  23. Dantheman1540

    Free to me 1996 GMC

    I must let you know, the PO of this truck showed me some play bois on like my 12th B day when he took me shooting, with no hearing protection. Anyway he would approve of these ideas
  24. Dantheman1540

    Free to me 1996 GMC

    How about LORGEKAK, BIGWANG, or COKBBIG?
  25. Dantheman1540

    2004 6.0 NV4500 Tahoe

    Fix it and let me know what the problem is lol

Forum statistics

Threads
134,275
Posts
1,899,376
Members
99,764
Latest member
bmxbry9
Top