Search results

  1. 76Nick

    2003 Tahoe, RPMs jump from 600 to 800 every 8 seconds and AC clutch spins when climate controls are turned on.

    I'll give that a shot thanks. I have the auto hvac controls...do you think the controls may have something to do with it?
  2. 76Nick

    2003 Tahoe, RPMs jump from 600 to 800 every 8 seconds and AC clutch spins when climate controls are turned on.

    So I am having a weird issue with my 2003 Tahoe Z71. At idle when I turn on the climate controls (even with the AC off) the AC compressor clutch spins for a couple seconds and the RPM's jump from 600 to 800. Then the clutch stops and the RPM's go back to 600. This happens about every 8 or so...
  3. 76Nick

    My 03 Z71 has a 4 groove steering box and pitman arm...can I swap them with 3 groove?

    Hey guys, so I have an 03 Z71 that has had the entire front end rebuild when I lifted the truck....except the steering box and arms so it's time. My truck has a 4 groove steering box shaft and Pitman arm. I found a good deal on the steering box online so I ordered it. Only issue I they sent me a...
  4. 76Nick

    Looking for rear sway bar links for a Z71 with a 3" rear lift. Please help!

    Yeah, Helwig doesn't have anything for Chevy at all and Rough Country had them only for the previous generation up to 1999 unfortunately.
  5. 76Nick

    Looking for rear sway bar links for a Z71 with a 3" rear lift. Please help!

    Hey guys, so after finishing my lift on my 03 Tahoe with 3 inch rear spacers, I am at a loss on rear sway bar links. I bought some adjustable jeep ones but still not long enough. Would anyone happen to know which Jeep links would work and be long enough for a 3" lift? Or any other option...
  6. 76Nick

    03 Z71 Tahoe with 4" RC NTD lift still rides kinda rough

    Sorry guys, I didn't mean to abandon my post....have been dealing with some things. Thd torsion bars are stock, the keys are not as stated. 2" lift I believe. I didn't have OE keys to put in. The Rough Country NTD kit is supposed to give factory ride quality. Possibly new Jounce stops? Could...
  7. 76Nick

    03 Z71 Tahoe with 4" RC NTD lift still rides kinda rough

    Anyone have any ideas where my issue lies?
  8. 76Nick

    03 Z71 Tahoe with 4" RC NTD lift still rides kinda rough

    Drivers side looks like its dropped down more but the keys are adjusted the same amount on both sides and the wheel well spacing is the same from drivers to passenger side.
  9. 76Nick

    03 Z71 Tahoe with 4" RC NTD lift still rides kinda rough

    Ok guys so as talked about in a previous post, I installed a 4" Rough Country NTD front lift for a Silverado on my 2003 Tahoe Z71. I went from a 3" torsion key/spacer lift. I liked the ride height but the ride quality was trash as you all know. I really hoped that a NTD lift would give me...
  10. 76Nick

    Adjustable Panhard bar hits aftermarket dif cover with 3-4" lift

    Ok so I reached out to Spohn and they actually make an adjustable an panhard bar that has a bump out on it to clear aftermarket dif covers. They gave me a part number and said I have to call to order it. It's about $100 more than the straight one so worth it to me to save myself the time...
  11. 76Nick

    Adjustable Panhard bar hits aftermarket dif cover with 3-4" lift

    I may end up doing that. A small section of 2 of 2 of the fins already have a nice gouge in them from the track bar. Correct me if I'm wrong but don't lift kits come with a bracket that just lifts the track bar some at the axle? Unfortunately my rear lift wasn't part of my kit so I don't have that.
  12. 76Nick

    Adjustable Panhard bar hits aftermarket dif cover with 3-4" lift

    Yeah I can't seem to find one for a 900 either. I have an email out to fabtech. Hopefully they respond tomorrow, otherwise I'll have to make one myself I guess.
  13. 76Nick

    Adjustable Panhard bar hits aftermarket dif cover with 3-4" lift

    Are you talking about the fabtech track bar bracket?
  14. 76Nick

    Adjustable Panhard bar hits aftermarket dif cover with 3-4" lift

    Ok so here is my dilemma. I put a 3" lift on my 03 Tahoe Z71 which has an aftermarket dif cover. My passenger side wheel sticks out more so I got an adjustable Panhard bar (not a Spohn) however it hits the aluminum dif cover pretty bad so I am afraid if I use it the first good bump I go over...
  15. 76Nick

    Will Rough Country 4" NTD Silverado lift (front parts) work on a Tahoe?

    Awesome, thanks for all the help Trey! I will have to get the bar ordered. I called Rough Country today and its more money for me to buy just the front lift pieces so looks like I will have to order the whole lift. Also I just checked out those c50r springs and they are 5". I have seen 3"...
  16. 76Nick

    Will Rough Country 4" NTD Silverado lift (front parts) work on a Tahoe?

    So I just checked for the hell of it, as I did a rear end swap the same day as I did the 3" lift and my right tire sticks out more than the left...at least a 1/2" or more! Measured from frame to the tire. Looks like I will have to get that bar. That will fix that and re-center it? What type of...
  17. 76Nick

    Will Rough Country 4" NTD Silverado lift (front parts) work on a Tahoe?

    Thanks for the info! Yeah I didn't need to do anything with the track bar when I put the 3" lift on but I don't know what that extra inch will do. I know the 6" kit comes with the track bar relocation bracket. Although I probably should get the adjustable bar anyway as the stock track bar being...
  18. 76Nick

    Will Rough Country 4" NTD Silverado lift (front parts) work on a Tahoe?

    Thanks, I was almost positive everything was the same but I needed to be sure. Yeah I was thinking about reaching out to them. Not sure why they don't just offer a 4" kit like they do for the Silverado.
  19. 76Nick

    Will Rough Country 4" NTD Silverado lift (front parts) work on a Tahoe?

    So I want a 4" NTD lift on my 03 Z71 Tahoe but I can't afford to spring for the Tuff Country. Unfortunately Rough Country doesn't make a 4" for the Tahoe so my question is will all the front components from the Silverado kit work on a Tahoe? I already have a 3" spacer in the rear on my truck as...
  20. 76Nick

    6" lift with 2-4" lift upper control arms?

    Ok good. I replaced everything front end wise but the pitman and lower control arms so I should be ok.
  21. 76Nick

    6" lift with 2-4" lift upper control arms?

    I didn't realize that. So basically you're telling me it's still gonna ride like crap
  22. 76Nick

    6" lift with 2-4" lift upper control arms?

    So here is my situation and question. I have an 03 Tahoe Z71 with a 3" torsion key lift. I Installed a set of 2-4" lift control arms to improve ride quality a bit and help spare my ball joints. Obviously it still rides like crap because its a torsion lift. I am thinking about putting on an...
  23. 76Nick

    Rear hvac module discontinued. Can mine be repaired?

    I'll have to make sure before I buy one providing I need to go that route. Thank you
  24. 76Nick

    Rear hvac module discontinued. Can mine be repaired?

    Yeah I thought about grabbing one from the junk yard but didn't want to end up with another bad one. From what I understand this is a fairly common problem. That's why I asked if anyone knows how to repair them. Assuming its probably a component inside that goes bad and needs to be removed and a...
  25. 76Nick

    Rear hvac module discontinued. Can mine be repaired?

    Dorman 601-036. I do not have Tech2. The actuator is stuck on cold and won't move unless I power it manually with my power probe. I will bid on that unit. I looked a couple days ago and the only one on ebay was a used unit the guy was asking $295 for. Thank you

Forum statistics

Threads
133,585
Posts
1,887,827
Members
98,808
Latest member
Andreste22

Latest posts

Top