Search results

  1. H

    Lifted/Leveled 2021 - Postem Up

    That’s a mean looking stance it has though! I like it!
  2. H

    Lifted/Leveled 2021 - Postem Up

    It does sit level but the photo was taken on a slanted parking spot
  3. H

    Lifted/Leveled 2021 - Postem Up

    So I finally got my RC 3.5” lift on yesterday afternoon with 35x12.5 Venom RT tires (I know I will get push back for these but I got them at a steal) and Bora 1.5” spacers on front (they only had 2 in stock yesterday) the rear spacers will be sent to my house next week and I will put them on...
  4. H

    Lifted/Leveled 2021 - Postem Up

    I was looking at running the 1.25" Bora spacers as well. It should fit. If it does not, I have no issue with trimming.
  5. H

    Lifted/Leveled 2021 - Postem Up

    Thank you, I’ll go ahead and order that too. Hopefully I’ll have it all on in the next week or two.
  6. H

    Lifted/Leveled 2021 - Postem Up

    Hey Guys, I just ordered the RC 3.5" lift and 35x12.5x20 tires. I want to use it on my stock Z71 20" wheel. Do any of you know what size spacers I will need to prevent rubbing UCA, inner fender, ect. I do not want them to stick out far. Just enough to not rub.
  7. H

    Lifted/Leveled 2021 - Postem Up

    I’m looking at squeezing a 35x11.5 tire under mine. Did you replace the UCA with the 2.5”?
  8. H

    Lifted/Leveled 2021 - Postem Up

    Those are the builds I originally saw. I sent them a message yesterday and waiting on a response. The 35x12.5 I would have to imagine a lot of trimming is needed.
  9. H

    Lifted/Leveled 2021 - Postem Up

    Yeah that’s what seemed a bit odd to me. Maybe RC is just giving a very conservative number. I can’t decide if I want to go 2/1 or the 3.5”.. do you really have to trim the studs on the 2/1 lift?
  10. H

    Lifted/Leveled 2021 - Postem Up

    Has anyone tried fitting a 35” tire with the 3.5” RC lift kit? I see the website recommended at 33.2x12. I was curious to know what the max size would be without trimming.
  11. H

    Wheel Spacer Size Question 2022 Z71 Tahoe

    I would also like to note I am not going to do the 2/1 lift as it seems very level as is for some reason. Have not taken official measurements yet.
  12. H

    Wheel Spacer Size Question 2022 Z71 Tahoe

    Hey guys, Sorry it has been a while. I went with the 1” hub centric spacers on Amazon. It does not say it fits the vehicle but I put them on anyway. I did not require any trimming of the studs. With the Z71 wheels there are hollow areas where the stud fits inside it on the spacers. Have driven...
  13. H

    Wheel Spacer Size Question 2022 Z71 Tahoe

    I ordered the 1” Hub Centric spacers. They will be here Sunday. I’ll likely install Monday and give feedback.
  14. H

    21 Tahoe Z71 Leveling Kit

    Are the photos with the stock wheels before or after the RC 2/1 lift? I am looking to order the 2/1 lift but my Z71 looks like it’s already pretty level. I want to avoid being nose high.
  15. H

    Wheel Spacer Size Question 2022 Z71 Tahoe

    I have seen some 5/16th” and smaller on eBay. These do not have the studs. They go over your existing studs. Seems l the problem is 1-1.25” I believe it is related to the studs but I am not certain.
  16. H

    Wheel Spacer Size Question 2022 Z71 Tahoe

    Hey guys, I purchased a 2022 Tahoe Z71 this week. I am looking to purchase the RC 2/1 lift and I’d like to also put wheel spacers on that sit flush with the wheel well with a 285/60r20 tire. What size wheel spacer do you guys reccomend to have the tire/wheel sit flush with the wheel well? I...
  17. H

    Show off your 2015+ leveled Tahoes and Yukons!

    I’m a big fan of them. It’s a great economic decision if you want semi-Off-road coilovers. They come with the springs so the ride is slightly firmer but it feels more controlled.
  18. H

    2015 Ykon SLT...Fender trimming ideas?

    I am currently running 295/55/20 on my 2015 Yukon SLT. I was thinking of running a bigger tire but am afraid of the rubbing on the fender. I’ve got 3-3.25” of lift on front with rough country UCA and .5” wheel spacers. Does anyone have any pictures of how you trimmed your fender well to fit the...
  19. H

    Show off your 2015+ leveled Tahoes and Yukons!

    Just posting this from about a month back. Will try to get more pictures later. 2015 Yukon SLT Rear: Blistein 5160 with the Moog springs and 1.5” lift spacer Adjustable sway bar links front: Rough country UCA bilstein 6112 adjustable coil overs with springs and small top out spacer to level...
  20. H

    Moog 81069

    Thank you for the feedback. I am looking to order these if I do not find springs that give 2" of lift.
  21. H

    Moog 81069

    Hello all, Has anyone here ran the Moog 81069 rear coil spring? If so, how did you like it? Are there any better options as replacement over stock coil springs?
  22. H

    Rear Coil Spring 2” Lift?

    Hello everyone, it’s my first post. I’ve been an owner of a 2015 GMC Yukon SLT 2WD for about 9 months now and so far I’ve done the following to the suspension: 295/55r20 Nitto ridge grappler .25” wheel spacers RC UCA (the 3.5” lift one) Bilstein B8 6112 (on 1st setting after 0 lift) 3” coil...

Forum statistics

Threads
132,375
Posts
1,866,966
Members
97,006
Latest member
BK613

Latest posts

Top