Search results

  1. AmunRoo

    Very Poor Gas Mileage

    I'm definitely going to try and remember to do the manual calculations for the gas mileage lol I just bought new rims and tires. Running 24s now
  2. AmunRoo

    Very Poor Gas Mileage

    My current average
  3. AmunRoo

    Very Poor Gas Mileage

    No farting! They are both proper ladies lmao I did however notice that the AC compressor is constantly cycling even though I'm not running AC. I'm going to turn off HVAC completely and see if it's still cycling.
  4. AmunRoo

    Very Poor Gas Mileage

    A lot of great responses. Thank you all very much. I appreciate it. So to answer some of the questions, I drive the trucks exactly the same. My foot is just as heavy on the Denali as it is in the Escalade. The displacement between both trucks is the same. Only difference is that Yukon has the...
  5. AmunRoo

    Very Poor Gas Mileage

    Not sure if this post is in the right place. I recently purchased a 2010 Escalade with the L94. My Long Term fuel Trims are near perfect and they fluctuate between -2 and +2. I have only had the truck about a week and half. I have ordered new O2 sensors, both upstream and downstream. A new MAP...
  6. AmunRoo

    Big Brake Upgrade finally done!

    The four piston rear is my next project. I need to find all the part numbers for that upgrade. I still haven't looked for anything yet. If you happen to know, you can save me the trouble of looking lol
  7. AmunRoo

    Big Brake Upgrade finally done!

    Here are a few more pictures
  8. AmunRoo

    Big Brake Upgrade finally done!

    So I bought all my parts back in April but I haven't had the opportunity to get the upgrade done because my wheels did not give me enough clearance. So I finally bought a set of wheels with a plus 30 offset that worked perfectly. I actually had no issues with clearance on the rotor or the...
  9. AmunRoo

    2021 pPV wheels

    This is a preliminary fitment and i'll repost once i get new wheels that clear the rotors. Painted them myself lol
  10. AmunRoo

    Big rear brake suggestions

    Hey y'all, I'm about to get my big brake upgrade going once I buy some new wheels. I don't want to run 2 in spacers for my current wheels to fit. Anyway, Does anyone know of any rear brake upgrade that would involve maybe a four piston caliper or a two piston side by side caliper setup? FYI...
  11. AmunRoo

    2021 pPV wheels

    I was hoping maybe someone can shed a little light for me. I have a 2007 Yukon denali. I bought the Brembo 6 piston calipers and I mocked everything up. I did not have any fitment issues with the calipers or the rotor. Surprisingly all I needed to do was put the bracket that holds the real speed...
  12. AmunRoo

    2021 PPV Front Brakes on 2013 Escalade ESV, and rear brake overhaul

    Hey Seth, Hope you've been able to clear up the spacing issue. I'm curious to know how your project is coming along as i'm getting ready to start my upgrade this weekend. Hopefully I don't have the spacing issues as i'm running aftermarket 24 inch rims.
  13. AmunRoo

    Rear Brake Upgrade

    So i'm getting ready to do the 6 piston brembo caliper upgrade on my 2007 Denali. I'm curious to know if there are any upgrades for the rear that would be a 4 piston upgrade. I did read somewhere that a CTS-V rear caliper was able to be used but i'm not finding any information on this subject...
  14. AmunRoo

    ARP Valve Cover Bolts

    Hey Y'all! I had a curious question. I ordered a set of ARP valve cover bolts. Part number is 100-7523. Not really too sure if I needed more parts for them. But my question was if anyone has had any experience with them. Have you bought them and not installed them because you couldn't figure it...
  15. AmunRoo

    Water Pump Dress Pulley

    Hey Y'all, I was wondering if anyone has done any dress pulleys on their belt drive system? I have one on my power steering pump and I was looking to do the rest of them this coming spring. I'm currently trying to find something for my water pump and was curious to know if anyone has changed...
  16. AmunRoo

    Quick Tire Question

    yep, i have checked reviews on various sites. The problem is that they are all over the board. They all have positive heavy reviews but they are for a variety of vehicles. The all also have concerning bad reviews. Balance issues, out of round issues, noise issues, premature wear issues, etc...
  17. AmunRoo

    Quick Tire Question

    So... I'm in the market for a new set of tires. I'm trying to find something economical but decent in the performance aspect. I happen to come across the ATTURO Trail Blade ATS and they aren't that expensive but, i've always felt that you get what you pay for. Has anyone bought these tires...
  18. AmunRoo

    Post head gasket job issue

    Cleaned them with oven cleaner, front and back. Used a 2k° engine primer. Used regular DupliColor paint and clear coat.. 5 coats of the blue and 5 coats of clear.
  19. AmunRoo

    Post head gasket job issue

    I also cleaned the intake manifold, throttle body and replaced the oil pressure switch. I cleaned each piston individually with oven cleaner and a toothbrush. I only cleaned the Piston once it was at top dead center for each piston. I chased every single thread for the heads. Replaced every...
  20. AmunRoo

    Post head gasket job issue

    So as I posted in an earlier thread, I tore down the top end of the motor to replace a bad lifter that was squealing. So the issue was in cylinder number 8. That lifter was definitely failing but on the bright side it did not damage the cam at all. I installed my new LSX lifters and brand new...
  21. AmunRoo

    Wiring harness help needed

    I appreciate you guys a lot more than you know!
  22. AmunRoo

    Wiring harness help needed

    All right, I need some help trying to pinpoint the path for a ground wire from the bank to coil harness. This is for the connector on the engine harness that feeds the oil packs for Bank 2. I don't have ground. I'm getting misfires on all four cylinders because I have no spark. I spliced in the...
  23. AmunRoo

    Need some Advice on Engine tear down

    Here's the update. I started everything Friday evening and this is where I'm at. Pulled off heads and found that valves are perfect. Dropping off the heads tomorrow to get resurfaced. Installing the new LSX lifters and hardened pushrods once I get the heads back. Brand new gaskets all the way...

Forum statistics

Threads
132,724
Posts
1,873,224
Members
97,554
Latest member
Carlos123

Latest posts

Top