lifted

  1. K

    What wheels specs and tire size?

    Hi long time creeper have had multiple Tahoe's and Yukon's. just got a 2017 Yukon Denali I am installing the mag delete kit with the Bilstein 5100 that lifts it 3" in the front and 1.5" in the rear. My question is what wheel sizes do I need and specs. from what I have found out I want a 18x9...
  2. swathdiver

    Whose Lifted Suburban and Jayco Trailer Is That?

    Not enough tongue weight, the tail wagged the dog.
  3. Eltoxico

    I hope I bought the right parts

    I've been creeping these forums for the past couple months while deciding which parts to buy for a basic 2 to 3" lift/level and bigger tires without breaking the bank. Quick backstory, last year a few months before I got deployed, I bought Big Bertha, a 2005 Yukon SLT 4x4, at a decent price of...
  4. RoBear727

    5in lift upper control arms

    Morning everyone, I believe this is my first post here. So a little background so hopefully it’ll help with answers. I have a 2007 Tahoe lt 4x4. It is currently has a 5 in rough county lift.( spacers up front ). Sitting on 35x12.5x18s. I had the issue where the front was sitting lower than the...
  5. B

    Cv axle issues on lifted tahoe

    I have a 2005 Tahoe on a 6-inch lift and the cv axles I use keep breaking. It's only the driver's side axle and before it breaks it makes a clicking sound and sort of jerks the truck when the wheel is turned until the axle breaks. Does anybody have any idea what the problem could be? Should I...
  6. Tahoe_Rx

    Removed factory running board

    I removed the factory running board just to see how it would look. What do y’all think? Do you prefer with or without?
    • Tahoe_Rx
    • Thread
    • leveled lifted running board
    • Replies: 15
    • Forum: Exterior
  7. Mordechai

    Lifted Caddy throws me around over bumps, uneven roads,

    Hi everyone, I'm trying to figure out this extremely annoying problem. I'm lifted on a 6 inch Fabtech lift but used to be on a 7.5 inch RC lift and I've tried factory struts, RC upgraded struts, and Bilstein 5100 struts with no difference in this feeling. I've had Bilstein 5100s in the rear the...
  8. Trey Hardy

    Memphis mojo and down for sound 07 Tahoe build

    Just wanted to share my build for the Tahoe Isn’t completely finished yet and not to many pics yet either until I’m done So far I have a kenwood double din ddx3 I threw some Memphis audio m6 coaxial a in the rear door Memphis tweeters in the dash Just ordered some down for sound 6.5s I you...
  9. D

    Hello, 2013 Tahoe from Texas

    Hello im Dylan from Texas, I have a white 2013 Tahoe im doing a list of mods to my tahoe, and im hoping to find a tahoe group to meet up with around texas.
  10. Dustin Jackson

    Aftermarket Trackbar for lifted Tahoe?

    Hey guys me again with more questions. I lifted my Tahoe a little bit more recently and now I see that my rear axle is not centered under my Tahoe, I found this out myself after I had it aligned. The alignment shop didn't mention this to me, would this affect my alignment? Here is what I...
  11. M

    09 Denali XL Air spring swap

    I’m looking for a lift kit for my 09XL but with a twist. I want a lift but I want a kit that has air over coils so I can back under a trailer then lift it without needing to get out to do so. Yes I know I have to get out and lock the head. Any suggestions?
  12. GHrnndz

    Lift Kit problem

    Hello everyone, I joined the community here in hopes of solving my current problem. I recently got a 7.5 inch Rough Country lift kit installed on my 2007 Yukon SLT 4WD. The problem is while I am driving and let go off the gas. The very front middle bottom of the truck makes a very loud rubbing...
  13. DirtyHoe2002

    Low Mileage 2002 Chevy Tahoe LT

    Hello all, it is time to let my pride and joy go as I am now in need of a diesel truck. I have had this thing for two years now, never had an issue with it and absolutely love it; however, times change and that is just life. I have a lot of money invested in it, more than I would like to admit...

Forum statistics

Threads
132,306
Posts
1,865,706
Members
96,895
Latest member
EGDinSD

Latest posts

Top