Chads93GT
Full Access Member
Ok, after half a million miles (more or less) this seat is a gonner. Quite a while back the circuit board housing under the seat that controls everything broke and one of the connectors really got busted up in the process. The seat still would recline and move forwards and back, but only if i stuck my hand under the seat to mess with the connector. I SHOULD have took the seat out then and resoldered the board back together and fixed it but I didnt. now the connector to the circuit board has broke off so the only thing that works now on the seat is A. the heater (who cares its effing 112 out) and B. the power lumbar. Other than that, the seat is stuck fully moved back and at an upright position. thank god I am tall, but still..........
Now, the front star bolts are fully exposed, for unbolting the front of the seat, but how in the hell am I going to get the seat out when I cant move the seat forward to get to the back bolts? Halp!!!
Thanks.
Chad
Now, the front star bolts are fully exposed, for unbolting the front of the seat, but how in the hell am I going to get the seat out when I cant move the seat forward to get to the back bolts? Halp!!!
Thanks.
Chad
