07Burb’s 09 Deathscalade Non-Build

[07Burb]

Didn't want to listen to me huh?

You weren’t as convincing as @mikeyss who also stated “same thing happened to me and…”

 

[Fless]

IIRC the "switch" contains two or three internal switches and they separately operate different functions. So one internal switch may be bad while the others work.

 

[Fless]

Pic of NBS switch internals in this thread:

I Took Apart My Brakelight Switch - PICS

I had a code for a bad brake light switch. I replaced it this morning, and took the old one apart to see what was bad. I figured I would post pics of whats going on inside, since this is a common issue.... The truck is an 04 Yukon XL 1500, with power adjustable pedals... First off, here is...

www.tahoeyukonforum.com

 

[iamdub]

Had that thought, too, but my brake lights come off and on like you'd expect when the brake pedal is depressed and let off

As was mentioned, the switch has multiple contacts. I think some are NO and some are NC. I could jab my brake pedal a few times then lift the pedal with my foot behind it and get my cruise control to engage. Brake lights always worked, though. New switch fixed it. I took apart the old switch to see if it was just dirty contacts. Everything looked clean. Probably worn parts. Not worth fixing for a $15 (at the time) switch.

 

[mikeyss]

Easiest thing to check first right?

Just make sure to not get him wet!

 

[gooffeyguy]

did you top off the cruise control fluid?

Is that on the maintenance schedule along with the blinker fluid?

 

[pwtr02ss]

I was going to suggest the brake switch too. Although, I don't recall what made me notice the cruise not working. I don't remember if a check engine light came on or not. I never use cruise so something had to make me replace it

 

[07Burb]

I was going to suggest the brake switch too. Although, I don't recall what made me notice the cruise not working. I don't remember if a check engine light came on or not. I never use cruise so something had to make me replace it

I use cruise constantly especially on trips. If I don’t I’ll end up going 110 and not even realize it until I see a cop and it’s too late

 

[89Suburban]

I use cruise constantly especially on trips. If I don’t I’ll end up going 110 and not even realize it until I see a cop and it’s too late

Hope that cruise control is working on that Burby!!

 

[pwtr02ss]

I use cruise constantly especially on trips. If I don’t I’ll end up going 110 and not even realize it until I see a cop and it’s too late

I would love to use it but with the hills here, it goes full throttle and down shifts to 2nd on a slight incline, not realizing we're almost at the top of the hill. On my Yukon, **** the ACC cruise. It slams the brakes on randomly