I replaced a few bulbs in my 2002 yukon xl cluster today, but they don´t work anyway now.
What´s wrong here?
I have checked codes, but it doesn´t give a code for an open ses circuit. It doesn´t even give any code.
I checked the scanner, removed the wire that goes to the maf, then it gives a code, so I assume the scanner works.
Anyway, I replaced the (original) leds with ordinary lightbulbs, 14 volt 100 ma.
They work when I put power on them, but not when I put the dash together and turn the ign. key.
Same for the ABS bulb, wich also didn´t work before.
The ses light didn´t light up before when turning the ign. key.
Now my brain don´t know more what to do.
Well, its pretty cool with no lights on, but what when something goes wrong and I don´t know about it.
Is it 12 volts or 5 volts on that system?
What´s wrong here?
I have checked codes, but it doesn´t give a code for an open ses circuit. It doesn´t even give any code.
I checked the scanner, removed the wire that goes to the maf, then it gives a code, so I assume the scanner works.
Anyway, I replaced the (original) leds with ordinary lightbulbs, 14 volt 100 ma.
They work when I put power on them, but not when I put the dash together and turn the ign. key.
Same for the ABS bulb, wich also didn´t work before.
The ses light didn´t light up before when turning the ign. key.
Now my brain don´t know more what to do.
Well, its pretty cool with no lights on, but what when something goes wrong and I don´t know about it.
Is it 12 volts or 5 volts on that system?
