2008 GMC Yukon "Regency" Edition Build Thread

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Status
Not open for further replies.

Blazed

Accepting Donations
Joined
Dec 20, 2010
Posts
4,243
Reaction score
10
Well it's hard to tell you if it's hooked up right from that picture there are so many other places in the wiring that could be wrong.
 

Modded

That Guy
Joined
May 3, 2009
Posts
6,942
Reaction score
108
Alright thanks so everything looked correctly wired?

Kind of. It looks like the top two speaker terminal have just one wire going to them? Also, the bottom terminal have both side of the double stranded wire going to one terminal each. Is that to make up for a thinner gauge wire than you wanted?
It will need some cleaning up also but I know you already plan on that.

---------- Post added at 01:00 AM ---------- Previous post was at 12:59 AM ----------

Are you guys beefing?
 
OP
OP
Regency

Regency

Supporting Member
Joined
Dec 14, 2011
Posts
5,093
Reaction score
664
I honestly have no clue it was already pre-wired so I just plugged the old wires in I'm taking it to the shop to just have them do it instead that way it'll be right

Haha no atleast I don't think so
 

Modded

That Guy
Joined
May 3, 2009
Posts
6,942
Reaction score
108
Yeah that is your best bet Reg since the pics can only tell a certain amount.
You may have shorted the remote or power wire when you made the switch if you were not careful to make sure they did not touch the ground, or the body of the car. If that is the case, you have a fuse or two blown somewhere.

Also, since you guys have differing standpoints on a potential rivalry, the first one with 28s and a 3/5 drop wins lol.
 
OP
OP
Regency

Regency

Supporting Member
Joined
Dec 14, 2011
Posts
5,093
Reaction score
664
Hired my friend to help me with details just finished up re-claying again to make sure it was completely de-contaminated and at 10 am tomorrow going to wash and then do some polishing charging up the flip and my DSLR for some help videos and photos tomorrow.

---------- Post added at 11:09 PM ---------- Previous post was at 11:08 PM ----------

Yeah that is your best bet Reg since the pics can only tell a certain amount.
You may have shorted the remote or power wire when you made the switch if you were not careful to make sure they did not touch the ground, or the body of the car. If that is the case, you have a fuse or two blown somewhere.

Also, since you guys have differing standpoints on a potential rivalry, the first one with 28s and a 3/5 drop wins lol.

Hmm alright I'm sure the shop could figure all of that out right?
Think I want to go to MIT to learn all of this and be my own shop.
And haha good one!
 

Modded

That Guy
Joined
May 3, 2009
Posts
6,942
Reaction score
108
Yes the shop will definitely know which of those is presenting you with a problem if it is one of them.
 
Status
Not open for further replies.

Forum statistics

Threads
132,314
Posts
1,865,817
Members
96,908
Latest member
Boosyed96GSX
Top