2010 Passenger Seat Recline Issue

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Schimpfy

TYF Newbie
Joined
Sep 10, 2018
Posts
3
Reaction score
0
Location
OH
I've tried a search for this, but I'm not sure I'm looking for the right thing...

The passenger seat in my wife's Yukon will recline just fine, but won't come back upright. Obviously, the motor works so that's not an issue. I took everything apart and reset the seat to the upright position mechanically and it still works to recline but not to the upright position.

I haven't been successful in finding a schematic of the seat components so I'm curious if there's a stop switch to prevent over travel of the seat in either direction or if it's internal to the main switch.
 

Big Mama

Full Access Member
Joined
Jul 21, 2015
Posts
3,392
Reaction score
2,057
Location
Virginia
Welcome Michael. Does the motor get power from the switch in both directions?
 

wjburken

Supporting Member
Joined
Dec 26, 2017
Posts
9,953
Reaction score
27,535
Location
Eastern Iowa
I've tried a search for this, but I'm not sure I'm looking for the right thing...

The passenger seat in my wife's Yukon will recline just fine, but won't come back upright. Obviously, the motor works so that's not an issue. I took everything apart and reset the seat to the upright position mechanically and it still works to recline but not to the upright position.

I haven't been successful in finding a schematic of the seat components so I'm curious if there's a stop switch to prevent over travel of the seat in either direction or if it's internal to the main switch.
Sounds like your switch assembly has gone bad. It’s an easy fix and costs about $50 for the switch.

upload_2019-10-30_20-36-12.jpeg upload_2019-10-30_20-36-12.png
 

Nightshade715

TYF Newbie
Joined
Sep 30, 2021
Posts
2
Reaction score
3
I've tried a search for this, but I'm not sure I'm looking for the right thing...

The passenger seat in my wife's Yukon will recline just fine, but won't come back upright. Obviously, the motor works so that's not an issue. I took everything apart and reset the seat to the upright position mechanically and it still works to recline but not to the upright position.

I haven't been successful in finding a schematic of the seat components so I'm curious if there's a stop switch to prevent over travel of the seat in either direction or if it's internal to the main switch.
Did u ever find the solution to this problem have this same problem with my 2013 yukon
 

Big Mama

Full Access Member
Joined
Jul 21, 2015
Posts
3,392
Reaction score
2,057
Location
Virginia
You can also check the control module for loose wires. When mine got stuck in my wife’s 5’2” position I was able to do this to move it back.
 

blondie70

Full Access Member
Joined
Nov 21, 2023
Posts
259
Reaction score
401
My seat adjusters don't work either. I had the seat out and everything looks good under there (Replaced the cushion). Glad it's stuck in my position...ha ha
 

Forum statistics

Threads
132,312
Posts
1,865,767
Members
96,903
Latest member
Joe Hale

Latest posts

Top