2010 PPV Suspension

[Morales1995]

Driver side front lower control arm (aluminum): 25997509
Passenger side front lower control arm (aluminum): 25997510
Front spring (x2): 15132801
Front strut (x2): 20955497-X
Rear spring (x2): 15200994
Rear shock absorber (x2): 20955430-X
Rear bump stop (x2): 15200997

This is what i have so far from another member on the police suspensions. However, I plan replace all these parts and ball joints sans the shock and strut I'm going with billstien 5100s. My question here now is, does anyone have the Spring part numbers for Monroe? I would like to save some money here and I know they make the PPV parts. I appreciate it guys and thank y'all.

 

[balln2k11]

Trying to help you here with the suspension questions and a little confused. Did you already purchase everything you listed (struts, shocks, springs, control arms)? Or are you asking if these are the correct part numbers for the factory PPV suspension items?

I would not recommend buying any PPV parts such as PPV springs, unless you want a crazy firm ride... that would be a waste of buying the 5100 Bilstein shocks/struts.

 

[Morales1995]

Trying to help you here with the suspension questions and a little confused. Did you already purchase everything you listed (struts, shocks, springs, control arms)? Or are you asking if these are the correct part numbers for the factory PPV suspension items?

I would not recommend buying any PPV parts such as PPV springs, unless you want a crazy firm ride... that would be a waste of buying the 5100 Bilstein shocks/struts.

Yeah, I’ve done some research on this, and I’m pretty much gonna get all those parts listed minus the springs. I think I’m gonna go with the moog springs. I do have one question I may throw a leveling kit in there at some point would the Bilstein 4600s work or would I need the 5100 ? Please let me know and thank you!

 

[kevlac]

Yeah, I’ve done some research on this, and I’m pretty much gonna get all those parts listed minus the springs. I think I’m gonna go with the moog springs. I do have one question I may throw a leveling kit in there at some point would the Bilstein 4600s work or would I need the 5100 ? Please let me know and thank you!

Did you ever do this and if so, how did it come out?

 

[Morales1995]

Did you ever do this and if so, how did it come out?

Unfortunately at the time my funds ran low so I ended up just getting the Moog HD springs and the quick strut assembly for the front and the did a spacer lift in the front and rear. I think I posted about it on another thread if you wanna see how it came out. Just go to my profile!

 

[kevlac]

Unfortunately at the time my funds ran low so I ended up just getting the Moog HD springs and the quick strut assembly for the front and the did a spacer lift in the front and rear. I think I posted about it on another thread if you wanna see how it came out. Just go to my profile!

Thanks much. Your rig looks great.