2013 Kon Denali Footwell Lighting

[the_trev]

looking to add some led strip lighting in the front footwells. just wondering if anyone knows where I can tap in for power so the lights are on all the time except when truck is off?

thanks

---------- Post added at 12:26 PM ---------- Previous post was at 10:29 AM ----------

Anyone?

 

[kses123]

Looks like you can get power at the BCM from the Light Green connector at either pin 1 or pin 14, whichever ignition key position you prefer. Not sure how much load you can put on it though. Might want to use a relay.

 

[the_trev]

Looks like you can get power at the BCM from the Light Green connector at either pin 1 or pin 14, whichever ignition key position you prefer. Not sure how much load you can put on it though. Might want to use a relay.

gmc


Where is this located?

 

[Goodinblack]

Where is the bcm on the nnbs

 

[the_trev]

Anyone know?

 

[kses123]

Under the dash on the drivers side...near the steering column.

 

[tojo152]

http://www.gm-trucks.com/forums/index.php?/topic/146836-GMT900---Footwell-Lighting