20x10 on a level

[dreww2001]

So my plan was to buy some 20x9 Fuels, there is a guy who will sell me his XD Heists and they're a 20x10 im planning on running the Open Country R/T because thats what hes already got on them and they were what i was already planning to go with the size are 305/55R20 Q what would I need to do to get them to fit? Im going with the Rough Country 2" Level

 

[02Burgundybeast]

You might scrub a little on the bottoms of the valance when turning but them only being a 10 wide you might be ok.

 

[01Konvict]

HA that wide of tire on a 2". You will need to trim bumper corner and maybe small norcal mod. I would do front 2" level and zone 2" body lift. This would make the offset and height look perfect.

 

[dreww2001]

HA that wide of tire on a 2". You will need to trim bumper corner and maybe small norcal mod. I would do front 2" level and zone 2" body lift. This would make the offset and height look perfect.

Would I need to mess with the auto ride in the back with a body lift?

 

[dreww2001]

HA that wide of tire on a 2". You will need to trim bumper corner and maybe small norcal mod. I would do front 2" level and zone 2" body lift. This would make the offset and height look perfect.

Could you also send me a link for the auto ride extenders I just went on zones website and they said I need the extenders and I don't know where I would find those at.

 

[01Konvict]

If you have front magnaride then you should get the suspension maxx front 2" kit with plate to set ride height controls at normal level. Body lift will do nothing to auto ride. It's a good 4" kit with 2" front level and 2" body.

 

[dreww2001]

If you have front magnaride then you should get the suspension maxx front 2" kit with plate to set ride height controls at normal level. Body lift will do nothing to auto ride. It's a good 4" kit with 2" front level and 2" body.

So I don't know a lot about the suspension so I should go with the zone 2,4 body lift and add another level from suspensionmaxx?

 

[01Konvict]

So I don't know a lot about the suspension so I should go with the zone 2,4 body lift and add another level from suspensionmaxx?

No any 2" front level will work but if you have ride height rods for electronic dampening up front then I would get suspension maxx since their kit has brackets for the level. Then order a 2" zone body and done with total of 4".

 

[dreww2001]

I'm sorry I'm asking so many questions or not getting it but are these the two kits you recommend

No any 2" front level will work but if you have ride height rods for electronic dampening up front then I would get suspension maxx since their kit has brackets for the level. Then order a 2" zone body and done with total of 4".

 

[01Konvict]

I'm sorry I'm asking so many questions or not getting it but are these the two kits you recommend


View attachment 75734

View attachment 75735

Yeah that body lift kit and this front level kit.
https://www.suspensionmaxx.com/store/product/SMX-GM725M