21+ Tahoe LED Tail Lights

[BlaineBug]

Is that in a T1XX (2021+) ?

Previous generation.

 

[Tenscourts]

Sorry guys. I'm waiting on the website to get the listing up. I can say I went on a road trip Wednesday from Eastern North Carolina to Busch Gardens in Williamsburg VA and I didn't get a single error, warning, or issue regarding the lights. It's about 3 hours one way.

 

[Deuce16GMCs]

Sorry guys. I'm waiting on the website to get the listing up. I can say I went on a road trip Wednesday from Eastern North Carolina to Busch Gardens in Williamsburg VA and I didn't get a single error, warning, or issue regarding the lights. It's about 3 hours one way.

Great news
I'm excited

 

[Tinbadtin]

Same here, can’t wait to try out. Seems like the best option for installing LED lights.

While we all wait, do you have any pics of the installed harness by any chance you can share?

 

[Tenscourts]

Same here, can’t wait to try out. Seems like the best option for installing LED lights.

While we all wait, do you have any pics of the installed harness by any chance you can share?

The install video I made was three parts. Here is the first part before I merged the three and sent it in.

 

[Tinbadtin]

The install video I made was three parts. Here is the first part before I merged the three and sent it in.

This is great! Thanks for sharing!

 

[BlaineBug]

Those are 3 enormous resistors! Wouldn't you need 4, marker, brake, turn signal, reverse? Or or all 3 resistors shown here solely for the reverse light circuit?

 

[Deuce16GMCs]

Those are 3 enormous resistors! Wouldn't you need 4, marker, brake, turn signal, reverse? Or or all 3 resistors shown here solely for the reverse light circuit?

Marker is already LED.

Turn, brake, and reverse are not.

 

[BlaineBug]

Marker is already LED.

Turn, brake, and reverse are not.

So essentially it's the same configuration as the 2020 Tahoe with the addition of an amber turn signal.

 

[Tenscourts]

Brake and Turn Signals are separate circuits on each side. The reverse lights are a single circuit which is why you only need three resistors on one side and two on the other. It doesn't matter which harness goes on which side. Sorry for the delay but I'm still waiting for them to get the listing up on the site.