50" Curved LED bar install

[2doorfiend]

alright, so i have the bar, and i got the mounting brackets from rough country... but i hit a dead end... where do i run the power wires?
i ordered these mounts because they dont drill straight into the roof, so i dont want to just drill a hole in the roof :'( any ideas? someone said through the weather stripping? I might be able to patch that up and make it look nice. Any help would be greatly appreciated.

Oh, I plan to run the wire to the overhead console to a switch, then down the A-pillar through the firewall to the battery

Thanks!

 

[2000tahoeZ71]

I ran my Sirius antenna wire under the weather stripping on the drivers door, up the channel to the top of the windshield. If you pull the weather strip from the flange where it pushes onto, there is a slot in the channel that allows you to pass the wires under the weatherstrip without it kinking and possibly cutting the wire. Just investigate it, you will figure it out.

 

[2doorfiend]

thanks, ill try it!