6 inch Suspension Lift Up Front, 3 Rear?

[BamaDogg]

I hopped under the Tahoe today because my 35's are rubbing. I noticed there was a 6 inch lift up front but a 3 inch block in the center and 3 inch blocks on the leaf springs. I am needing the back to come up another inch to clear my front tires. What should I do?

 

[SunlitComet]

What is a block in the center?

 

[bowtiefreak]

Add a leaf is a good option, that or a larger block. Can I ask for apicture of the current set up as I am a little confused about the 3" block in the center

 

[BamaDogg]

How difficult is it to add a leaf?

The whole issue is that my 315/75/16R's are rubbing the fender. I have considered going down to 33's or adjusting the back I guess. I just want it to ride well and not put stress on the parts.

Here are a few pictures:

 

[SunlitComet]

Some one needs some new ball joints, Jounce bumpers and some brush cleaning. Still not seeing this 3in center block you are talking about unless it is the RCD you are pointing out.

 

[Trippers99hoe]

your front driveshaft appears to be rubbing the exhaust

 

[JcKinney]

I'd guess he means the RCD is the block in the center. I'd do an add-a-leaf like bowtiefreak said, and yea those ball joints are a little wore

 

[BamaDogg]

Some one needs some new ball joints, Jounce bumpers and some brush cleaning. Still not seeing this 3in center block you are talking about unless it is the RCD you are pointing out.

Great...

Is this expensive? I am pretty clueless to all of this.

 

[SunlitComet]

your front driveshaft appears to be rubbing the exhaust

Maybe he was shortcuting the install.

 

[BamaDogg]

Also is this an immediate threat? Will it cause other issues?