96 2 door rear wiper switch question

[domer94]

does the row of individual switches pull out individually on their own? i have to replace the backlight on the rear wiper switch. do i just pry it out or does the whole dash bezel have to come out

thanks

 

[SunlitComet]

the column of switchs do come out individually by you may have to un-clip and push it out from behind the bezel.

 

[domer94]

thanks. do you happen to know what bulb i need for the wiper switch backlighting? i will have the dash apart soon for an aftermarket radio install , but i would like to have all the pieces of what i need before hand

thanks

 

[SunlitComet]

no clue as if it is replaceable actually. would need to see the back of switch to find out and i have barn doors in the rear.

 

[Tbruz]

The dash switches use similar bulbs to the radio.
They are T1 12V 50mA wire term bulbs.
You need to unsolder the old burnt out one(s) and solder in new one(s).
Should be able to get online or at any Radio shack.

I also have barn doors but I think the wiper switch has two bulbs in it.
Tbruz

 

[SunlitComet]

how do you have barn doors and a rear wiper.

 

[Tbruz]

Did not say I had wipers with my barn doors.
Barn doors and wipers are not an option on the same vehicle
I took apart a wiper switch to compare when rebulbing my fog light switch.
Tbruz

 

[SunlitComet]

knew i was missing something. i am getting to tired lately.

 

[domer94]

The dash switches use similar bulbs to the radio.
They are T1 12V 50mA wire term bulbs.
You need to unsolder the old burnt out one(s) and solder in new one(s).
Should be able to get online or at any Radio shack.

I also have barn doors but I think the wiper switch has two bulbs in it.
Tbruz

thanks . sounds easy enough