99 tahoe issue

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Asanford

TYF Newbie
Joined
Apr 24, 2019
Posts
4
Reaction score
0
Right side plugs are nasty, left side clean. engine starts fine, but needs to sit for a couple of minutes before driving or it is very sluggish. Any ideas?
 

drakon543

Full Access Member
Joined
Feb 15, 2016
Posts
2,473
Reaction score
1,715
^^x2
if your talking coated with black nasty stuff or you pulled the plugs and the electrodes are nasty. 2 separate issues and one is alot worse. next are you talking all around sluggish or just a bad take off from a stop. lastly simplest think alot of people leave out have you had the codes pulled yet. just because the check engine light isnt on doesn't mean you dont have codes.
 
OP
OP
A

Asanford

TYF Newbie
Joined
Apr 24, 2019
Posts
4
Reaction score
0
^^x2
if your talking coated with black nasty stuff or you pulled the plugs and the electrodes are nasty. 2 separate issues and one is alot worse. next are you talking all around sluggish or just a bad take off from a stop. lastly simplest think alot of people leave out have you had the codes pulled yet. just because the check engine light isnt on doesn't mean you dont have codes.
 

Matahoe

Full Access Member
Joined
Jan 27, 2016
Posts
445
Reaction score
164
Location
Grand Rapids, Michigan
It is the plugs, black and a bit wet!!!

Your coolant temperature sensor might be bad or loose / broken connection at the connector.

You will want to get a scan tool that reads coolant temperature or have a diagnostics shop perform the work.
 
Last edited:

liquify33

Full Access Member
Joined
Jan 21, 2019
Posts
351
Reaction score
337
Location
Houston
Your coolant temperature sensor might be bad or loose / broken connection at the connector.

You will want to get a scan tool that reads coolant temperature or have a diagnostics shop perform the work.

You can hook a multimeter up to it if you unplug from the firewall area and use the red on the 1 wire and black to a ground and use mV I think.
It does some voodoo and transmits the voltage to the gauges. No ECM or mechanical functions, that’s near the thermostat. It sits next to a spark plug on the driver side and is a $15 part.
 

Forum statistics

Threads
132,400
Posts
1,867,413
Members
97,055
Latest member
bluefox1221

Latest posts

Top