Aftermarket LCA's for RC3.5 kit

[Californian]

I have decided to go with a RC 3.5 kit with Bilstein 6112/5160 combo. I am looking for new lower control arms and I am wondering what people have found for options. I see the stock style ones but I really don't see any aftermarket ones. I am also looking for the rear arms and track bar for the rear axle. Has anyone found some decent LCA's or rear suspension components? Any advise on who to stay away from would also be very helpful.

Thanks,

 

[Dustin Jackson]

I have decided to go with a RC 3.5 kit with Bilstein 6112/5160 combo. I am looking for new lower control arms and I am wondering what people have found for options. I see the stock style ones but I really don't see any aftermarket ones. I am also looking for the rear arms and track bar for the rear axle. Has anyone found some decent LCA's or rear suspension components? Any advise on who to stay away from would also be very helpful.

Thanks,

@Californian Look into Spohn for rear parts. For front lower control arms the only options out there are factory style arms or Bajakits lower control arms.

 

[Californian]

@Californian Look into Spohn for rear parts. For front lower control arms the only options out there are factory style arms or Bajakits lower control arms.

thanks for the info. Yes I have looked at the bajakits stuff. its nice but a little overkill for my build. But if I had the money I would do there full kit.

 

[Dustin Jackson]

@Californian Your best bet is to go with a quality lower control arm of your choice. I went with MOOG, ACDelco is another option, I have heard of Mevotech but I haven't used them personally.

 

[87carl]

Lower control arm either is stock style or for long travel kits. There's a few long travel kits. Some advertised as for the trucks but will also fit the full size suvs. I have mevotech tough terrain upper and lower control arms in my 07. stock style but thicker casting and larger ball joints so they are stronger. In the rear spohn is best bet for control arms and panhard. But tighten the piss out of the delsphere joints or they will clunk and annoy you.

 

[Californian]

thanks for the info guys. I still haven't decided yet. I will report back with my decision for everyone and what the results were.

 

[Californian]

So I decided to go with the Mevotech TTX lower control arms and Kryptonite tie rod ends. For tires I decided on going with TOYO AT III in a 33x12.5x20. Now just waiting for the shocks to get off backorder.

 

[maxpsi]

So I decided to go with the Mevotech TTX lower control arms and Kryptonite tie rod ends. For tires I decided on going with TOYO AT III in a 33x12.5x20. Now just waiting for the shocks to get off backorder.

What is the part number for those tie rod ends?

 

[Marshall 008]

In case you were wondering about other options for LCA for our vehicles that are stock replacement. I was shown this by another member here. I will eventually go with these.

07-18 GM 1500 Lower Control Arms

NOTE: ESTIMATED REPLENISHMENT DATE IS 8/5/22 LSK Is Proud To Introduce The 07-18 GM 1500 Lower Control Arms Replacements. Our Lower Control Arms Utilize A 1.00" FK Uniball On The Outer Pivots With A 17-4 Stainless Misalignment For Increased Strength Over The Factory Balljoint Assembly. Inner...

www.lsksuspension.com