JenneK
Full Access Member
May I suggest a ScanGauge II? It monitors the temps your PCM looks at. It's almost not worth fussing around with the stock gauge cluster.
Another temp gauge question
- Thread starter Tbruz
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
SunlitComet
OBS Jedi-Do Good
JenneK
Full Access Member
That's a killer deal!
I bought mine about 6 years ago. Worth every penny.
I bought mine about 6 years ago. Worth every penny.
SunlitComet
OBS Jedi-Do Good
Coolant temp and air intake temp as seen by computer sensors yes. Tranny temp sensor for computer on obs, no luck yet here. Would be really cool tho.
---------- Post added at 11:38 PM ---------- Previous post was at 11:37 PM ----------
Go to website for comparison of products.
---------- Post added at 11:38 PM ---------- Previous post was at 11:37 PM ----------
Go to website for comparison of products.
JenneK
Full Access Member
I can read my tranny temps. Are you saying you cannot on the OBS?
It is the same X-gauge that I use for my Avalanche.
Trans Fluid Temperature (Exc Allison)
TXD - 6C10F1221940(01)
RXF - 046205190640
RXD - 3008
MTH - 00090005FFD8
It is the same X-gauge that I use for my Avalanche.
Trans Fluid Temperature (Exc Allison)
TXD - 6C10F1221940(01)
RXF - 046205190640
RXD - 3008
MTH - 00090005FFD8
Last edited:
SunlitComet
OBS Jedi-Do Good
Yeah the OBD x-gage I got had no results. But for poops and winkles I will give your coding a try. I think it was the system protocol that would not pass it although it shows in my ScanXL software.
SunlitComet
OBS Jedi-Do Good
yep tried it again and i had the same coding you used. on the obs it does not work apparently.
JenneK
Full Access Member
Odd...works great for me. I can see as soon as I hit 160* the hard 1-2 shifting starts up...
(Need to replace valve body)
(Need to replace valve body)
