Anyone know how to disable auto headlights on a 2006 Suburban?

[stevo]

Hello all,

This is my first post on this site. I just bought an '06 Suburban LTZ with 105,000 on it. I realize that you can turn the headlight switch back to turn off the headlights, but I would like to know if anyone has a permanent fix for this so they don't come on by themselves (I plan on putting HID's with a quad beam conversion kit in). I just don't feel like replacing a burned set of nice headlights.

Thanks

 

[anguyen325]

http://www.tahoeyukonforum.com/forum/showthread.php?t=10901

i tried this and it worked for me

 

[stevo]

http://www.tahoeyukonforum.com/forum/showthread.php?t=10901

i tried this and it worked for me

My body control module has different colored plugs and possibly wires. But I did check it out again. I did this mod on a '98 Yukon. I think in 2003 the plugs and wires got changed.

 

[anguyen325]

I mean I have an 02 yukon and it worked for me. Must've changed it on the 03-06.

 

[stevo]

Found the answer I was looking for. Remove the vent left of the glove box. Next, reach in and twist the ambient light sensor mounted to the top of the dash until it falls out. Carefully fish the wires and the sensor out of the vent (the wires are cable tied in some spots). Cut the wires from the sensor and use the same 1.5 k ohm resistor to tie the two wires together and your done. No need to disconnect batteries.

 

[livingez_123]

http://www.tahoeyukonforum.com/forum/showthread.php?t=10901

i tried this and it worked for me

Did this the other day, and it works on my 01 Denali.

 

[anguyen325]

Great to know. One of the best mods I've done so far. Still need to upgrade my sound though lol

 

[KEVIN GARRETT]

Found the answer I was looking for. Remove the vent left of the glove box. Next, reach in and twist the ambient light sensor mounted to the top of the dash until it falls out. Carefully fish the wires and the sensor out of the vent (the wires are cable tied in some spots). Cut the wires from the sensor and use the same 1.5 k ohm resistor to tie the two wires together and your done. No need to disconnect batteries.[/QUO

glad it worked for you im getting ready to do the same on my 06 tahoe.