AT4 3D Printed Items Thread
- Thread starter Fast_AT4
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
WalleyeMikeIII
Full Access Member
Well, Don't think I would want it very deep on the top, since the whole thing is only 5" deep.
Would have to think a bit about a layout...maybe a coin holder in the front in that narrower area, then maybe split the bin in half, and then split one of the halves in half again...so there is an area for longer items and something that contains some smaller ones?
Note, there is no way for the bin to "hang" from the sides, would have to sit on legs, I think?
Would have to think a bit about a layout...maybe a coin holder in the front in that narrower area, then maybe split the bin in half, and then split one of the halves in half again...so there is an area for longer items and something that contains some smaller ones?
Note, there is no way for the bin to "hang" from the sides, would have to sit on legs, I think?
WalleyeMikeIII
Full Access Member
Dimensions of the Denali Wireless charger area in attached pics, removed the rubber tray, measured inside and outside of that, as well as depth of the area.
Attachments
WalleyeMikeIII
Full Access Member
And here are the depth dimensions of the area:
Just under 2.75” toward the front, and just under 3.5” in the back.
Measured the thickness of my iPhone 13 Pro Max in its case. It’s about 1/2”, so legs on the “baby crib” probably should allow for 9/16 or 5/8” under the bed.
Just under 2.75” toward the front, and just under 3.5” in the back.
Measured the thickness of my iPhone 13 Pro Max in its case. It’s about 1/2”, so legs on the “baby crib” probably should allow for 9/16 or 5/8” under the bed.
Attachments
iamdub
Full Access Member
Before you market these things, just know that WiFi charging, at least in this aspect, hasn't been invented yet.
It's wireless charging, done via electromagnetic inductance. It just means the phone is charged without plugging a wire into it. It's not being charged via radio waves.
WalleyeMikeIII
Full Access Member
Qi is the standard implemented in the Yukon.
OP
OP
iamdub
Full Access Member
Talk about a brain fart!!! LOL (all fixed)
Speaking of the WiFis: I took my work van through an automatic carwash this morning. When paying at the self-service kiosk (it looked like a modified ATM, so, nothing unfamiliar), the attendant ran over to "help" me. I'm thinking, "Really, bro? I've used ATMs and self-checkouts countless times and my card clearly shows that I know how to use it". But I just said, "Hi, how ya doin?" and tried to ignore him as I continued to select my wash and pay. I went to insert my card and he tried to stop me and asked if my card had WiFi. I pretended to not hear him and continued swiping my card as I've done thousands of times before. Since he hadn't answered my first question, I asked as I waited for the machine to print my receipt, "You doin' alright?". He seemed to be at a loss for words, or maybe just entranced at my fluent use of their machine. So I grabbed my receipt and told Mr. WiFi Credit Card to "have a good 'un"!
OP
OP
Some 2x4 fun
OP
OP
Doubled side tape or magnets.
