antoniosDenali07
TYF Newbie
installed the belltech 2/4 drop 751sp kit. now i got the traction control light on, serve suspension light on, and abs light on? i need help! does anyone know what to do with the situation??
Belltech 2/4 751sp drop problem
- Thread starter antoniosDenali07
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
- Joined
- Jun 9, 2009
- Posts
- 8,744
- Reaction score
- 608
Do you have autoride? If so that kit gets ride of your autoride so you will have a message on the dash all the time you will need to cut the sensor harness that goes into all your shocks and add resistors
As for other things yeah a sesnor in back or from got popped off or damaged. lots of times when people do the rear drop and dont disconnect the rear sensor line from frame rail and lower rear end to put the springs in the yank on the line which damages it
As for other things yeah a sesnor in back or from got popped off or damaged. lots of times when people do the rear drop and dont disconnect the rear sensor line from frame rail and lower rear end to put the springs in the yank on the line which damages it
