Blinker problem

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

RynoHarris

Full Access Member
Joined
Nov 18, 2011
Posts
149
Reaction score
8
Location
Texas
So i just replaced my black insert headlights and black LED marker lights. This whole thing has been ridiculous. First my right marker light wasn't as bright as the left, and the left wouldn't blink. Now I have the same problem again, except when I first turned the left signal on my dash lights were blinking with it. Then after turning it back on the turn signal didn't work but the Blinker light just stays lit up no matter what. What in the world is going on? I never had problems with my blinkers with the stock lights on, although I'm not positive if the right side was less bright before because it was hazed and couldn't tell. Is it the led marker/blinker/bumper lights? Or do I need a new relay? Thanks!

---------- Post added at 07:31 PM ---------- Previous post was at 06:24 PM ----------

After further inspection. With truck running and lights off, right Blinker blinks fine, left Blinker blinks fine, other than the fact that every dash light, HVAC lights, and window/lock switch light blinks with it... Oh boy.

"Never argue with an idiot, he will bring you down to his level, and beat you by experience."
 
OP
OP
RynoHarris

RynoHarris

Full Access Member
Joined
Nov 18, 2011
Posts
149
Reaction score
8
Location
Texas
Well Nevermind lol, I checked my side marker light on the left that was out. Unplugged it and plugged it back in and now everything works right...other than fast blink. Lol

"Never argue with an idiot, he will bring you down to his level, and beat you by experience."
 

Forum statistics

Threads
133,120
Posts
1,880,160
Members
98,109
Latest member
kathrinebrown
Top